Supertex inc.
HV809
Off-Line, High Voltage EL Lamp Driver
Features
►► Processed with HVCMOS® technology ►► Input volt...
Supertex inc.
HV809
Off-Line, High
Voltage EL Lamp Driver
Features
►► Processed with HV
CMOS® technology ►► Input
voltage up to 200V DC ►► 400V peak-to-peak output
voltage ►► Output load up to 350nF (100in2 for 3.5nF/in2 lamp) ►► Adjustable output lamp frequency ►► Adjustable on/off pulsing frequency
Applications
►► Electronic organizers ►► Handheld portable computers ►► Display signs ►► Portable instrumentation equipment
General Description
The Supertex HV809 is an off-line, high
voltage, EL lamp driver integrated circuit designed for driving EL lamps of up to 350nF at 400Hz. The input supply
voltage can be a rectified nominal 120V AC source or any other DC source up to 200V. The HV809 will supply the EL lamp with an AC square wave with a peak-to-peak
voltage of two times the input DC
voltage.
The HV809 has two internal oscillators, a low
voltage output linear regulator, and a high
voltage output H-bridge. The high
voltage output H-bridge frequency is set by an external resistor connected between the REL-Osc and GND pins. The EL lamp is connected between pins VA and VB. For the HV809 in the 8-pin package, an external RC network can be connected between the oscillator’s Osc1 and Osc2 pins to pulse the EL lamp on and off.
For detailed circuit and application information please refer to Application Note AN-H36.
Block Diagram
HVIN
Linear Regulator
VDD
Osc1 Osc2 REL-Osc GND
Logic and Osc
Q Q
Q Q
VA VB
Doc.# DSFP-HV809 B071013
Supertex inc. www.supertex.com
HV809
Ord...