Memory. HY27UF162G2M Datasheet

HY27UF162G2M Datasheet PDF


Part HY27UF162G2M
Description (HY27UF(08/16)2G2M) 2Gbit (256Mx8bit/128Mx16bit) NAND Flash Memory
Feature ( DataSheet : www.DataSheet4U.com ) Preliminary HY27UF(08/16)2G2M Series 2Gbit (256Mx8bit / 128Mx16.
Manufacture Hynix Semiconductor
Datasheet
Download HY27UF162G2M Datasheet


( DataSheet : www.DataSheet4U.com ) Preliminary HY27UF(08/1 HY27UF162G2M Datasheet




HY27UF162G2M
( DataSheet : www.DataSheet4U.com )
Preliminary
HY27UF(08/16)2G2M Series
2Gbit (256Mx8bit / 128Mx16bit) NAND Flash
Document Title
2Gbit (256Mx8bit / 128Mx16bit) NAND Flash Memory
Revision History
Revision
No.
History
0.0 Initial Draft.
1) Edit Pin Description table
2) Edit Data Protection texts
3) Add Read ID table
4) Add Marking Information
5) Add Application note
6) Change AC characteristics
tCLS tCLH tCS tCH tWP tALS tDS tDH
0.1 Before 10 5 15 5 15 10 10 5
After 0 10 0 10 25 0 20 10
tWC tWH tRP tRC tREA tREH tCEA
Before 30 10 15 30 18 10 23
After 50 15 25 50 35 20 45
1) Add ULGA Package.
- Figures & texts are added.
2) Correct the test Conditions (DC Characteristics table)
Test Conditions (ILI, ILO)
Before
VIN=VOUT=0 to 3.6V
After
VIN=VOUT=0 to Vcc (max)
0.2 3) Change AC Conditions table
4) Add tWW parameter ( tWW = 100ns, min)
- Texts & Figures are added.
- tWW is added in AC timing characteristics table.
5) Add tRBSY (Table12)
- tRBSY (Dummy Busy Time for Cache Read)
- tRBSY is 5us (typ.)
- Figure 19,20 are edited.
6) Edit System Interface Using CE don’t care Figures.
Draft Date Remark
Dec. 2004 Preliminary
May. 23. 2005 Preliminary
Aug. 09. 2005 Preliminary
Rev 0.3 / Aug. 2005
www.DataSheet4U.com
1
www.DataSheet4U.com



HY27UF162G2M
Preliminary
HY27UF(08/16)2G2M Series
2Gbit (256Mx8bit / 128Mx16bit) NAND Flash
Revision History
Revision
No.
History
7) Change AC characteristics
tWH tR tREA tOH tREH
0.2 Before 20(4) 25 35 15 20
After 15 30 30 10 15
8) Delete the errata.
9) Correct Address Cycle Map.
1) Delete the 1.8V device’s features.
2) Change DC characteristics (Table 9)
- Operating Current
ICC1
ICC2
ICC3
Typ Max Typ Max Typ Max
0.3 Before 20 40 20 40 20 40
After 15 30 15 30 15 30
3) Correct PKG dimension (TSOP PKG)
CP
Before 0.050
After
0.100
-Continued-
Draft Date Remark
Aug. 09. 2005 Preliminary
Aug. 19. 2005 Preliminary
Rev 0.3 / Aug. 2005
2






@ 2014 :: Datasheetspdf.com ::
Semiconductors datasheet search & download site (Privacy Policy & Contact)