4
www.DataSheet4U.com
AC/DC Input Power Supplies
IC693PWR321 Standard Power Supply, 120/240 VAC or 125 VDC Input
The I...
4
www.DataSheet4U.com
AC/DC Input Power Supplies
IC693PWR321 Standard Power Supply, 120/240 VAC or 125 VDC Input
The IC693PWR32 is a 30 watt supply that can operate from an input
voltage source in the range of 85 to 264 VAC or 00 to 300 VDC. This power supply provides three outputs: Ŷ Ŷ Ŷ +5 VDC output, +24 VDC Relay power output which provides power to circuits on Series 90-30 Output Relay modules. Isolated +24 VDC, which is used internally by some modules, can also be used to provide external power for 24 VDC Input modules.
The load capacity for each output of this power supply is shown in the following table. Table 4-2. IC693PWR321 Power Supply Capacities Catalog Number
IC693PWR32
Load Capacity
30 Watts
Nominal Input
00 to 240 VAC or 25 VDC
Output Capacities (
Voltage/Power *)
+5 VDC 5 watts +24 VDC Isolated 20 watts +24 VDC Relay 5 watts
*Total of all outputs combined cannot exceed 30 watts.
IC693PWR321
GE Fanuc
SERIES 90-30
PWR OK RUN BATT SYSTEM STATUS INDICATORS
STANDARD POWER SUPPLY PROGRAMMABLE CONTROLLER INPUT
100-240 VAC 50/60HZ 90 VA
∼
CONNECTIONS FOR AC/DC POWER SOURCE
125 VDC, 50W
INTERNAL POWER SOURCE FOR MODULES REQUIRING 24VDC
+
24 VDC OUTPUT 0.8A MAX.
LITHIUM BACK-UP BATTERY
B A T T E R Y
RS-485 COMPATIBLE SERIAL PORT BATTERY CONNECTORS
Figure 4-1. Standard AC/DC Input Power Supply - IC693PWR321 Power supplies must be installed in the leftmost slot in all baseplates.
4-2
Series 90-30 PLC Installation and Hardware Manual – August 20...