QuickSaver Charge Control IC for Nickel-Cadmium and Nickel-Metal Hydride Batteries
ICS1708
QuickSaver® Charge Control IC for Nickel-Cadmium and Nickel-Metal Hydride Batteries
General Description
The ICS...
ICS1708
QuickSaver® Charge Control IC for Nickel-Cadmium and Nickel-Metal Hydride Batteries
General Description
The ICS1708 is a low cost 8 pin
CMOS control IC for the intelligent charging of either nickel-cadmium (NiCd) or nickel-metal hydride (NiMH) batteries. The ICS1708 uses a pulsed-current charging technique together with multiple
voltage slope termination methods. The ICS1708 employs a four stage charge sequence that provides a complete recharge without overcharging. The controller has three (3) user selectable charge rates, user accessible clock, and two (2) charge status output pins. On power-up, the ICS1708 monitors for the presence of a battery and begins charging. The ICS1708 is for applications where battery temperature protection is not required of the charge controller.
Applications
Embedded and charger stands for: Portable consumer products, Power tools, Audio/video products, Communications products, RC toys, and Wireless products
Features
Charge termination methods include:
Voltage slope (+∆V/dt and +/- peak detect), and Fast charge time out to maintenance mode Four stage charge sequence: SoftStart conditioning, Fast charge, Topping charge, and Maintenance charge Three (3) user selectable charge rates: 15 minutes (4C), 60 minutes (1C), 150 minutes (C/2.5) Continuous polling mode for battery detection Adjustable open circuit (no battery)
voltage reference
Benefits -compared to other methods
Peak battery performance and extended cycle life...