700MHz, Low Jitter, Crystal-to-3.3V Differential LVPECL Frequency
84330C
DATA SHEET
General Description
The 84330C is ...
700MHz, Low Jitter, Crystal-to-3.3V Differential LVPECL Frequency
84330C
DATA SHEET
General Description
The 84330C is a general purpose, single output high frequency synthesizer. The VCO operates at a frequency range of 250MHz to 700MHz. The VCO and output frequency can be programmed using the serial or parallel interfaces to the configuration logic. The output can be configured to divide the VCO frequency by 1, 2, 4, and 8. Output frequency steps as small as 250kHz to 2MHz can be achieved using a 16MHz crystal depending on the output divider settings.
Features
Fully integrated PLL, no external loop filter requirements One differential 3.3V LVPECL output Crystal oscillator interface: 10MHz to 25MHz Output frequency range: 31.25MHz to 700MHz VCO range: 250MHz to 700MHz Parallel or serial interface for programming M and N dividers during
power-up
RMS period jitter: 5ps (maximum) Cycle-to-cycle jitter: 40ps (maximum) 3.3V supply
voltage 0°C to 70°C ambient operating temperature Available in lead-free (RoHS 6) package
Block Diagram
OE
Pullup
XTAL1
XTAL2 FREF_EXT
OSC Pulldown
XTAL_SEL
Pullup
1 0
÷ 16
PLL PHASE DETECTOR
VCO
÷M
÷2
÷2
1
÷4 ÷8
÷1
0
S_LOAD S_DATA S_CLOCK nP_LOAD
Pulldown Pulldown Pulldown Pullup
M0:M8 N0:N1
Pullup Pullup
84330C Rev D 4/22/15
CONFIGURATION INTERFACE LOGIC
VEE TEST
VCC VEE nFOUT FOUT VCC
Pin Assignments
25 24 23 22 21 20 19
S_CLOCK 26
18 N1
S_DATA 27
ICS84330C
17 N0
S_LOAD 28
28 Lead PLCC
16 M8
V...