www.DataSheet4U.com
PRELIMINARY
Integrated Circuit Systems, Inc.
ICS853058
8:1, DIFFERENTIAL-TO3.3V OR 2.5V LVPECL/EC...
www.DataSheet4U.com
PRELIMINARY
Integrated Circuit Systems, Inc.
ICS853058
8:1, DIFFERENTIAL-TO3.3V OR 2.5V LVPECL/ECL CLOCK MULTIPLEXER
FEATURES
High speed 8:1 differential multiplexer 1 differential 3.3V or 2.5V LVPECL output 8 selectable differential PCLK, nPCLK inputs PCLKx, nPCLKx pairs can accept the following differential input levels: LVPECL, LVDS, CML, SSTL Maximum output frequency: 2.5GHz Translates any single ended input signal to LVPECL levels with resistor bias on nPCLKx input Part-to-part skew: TBD Propagation delay: 620ps (typical) LVPECL mode operating
voltage supply range: VCC = 2.375V to 3.465V, VEE = 0V ECL mode operating
voltage supply range: VCC = 0V, VEE = -3.465V to -2.375V -40°C to 85°C ambient operating temperature
GENERAL DESCRIPTION
The ICS853058 is an 8:1 Differential-to-3.3V or 2.5V LVPECL / ECL Clock Multiplexer which can HiPerClockS™ operate up to 2.5GHz and is a member of the HiPerClockS™ family of High Performance Clock Solutions from ICS. The ICS853058 has 8 differential selectable clock inputs. The PCLK, nPCLK input pairs can accept LVPECL, LVDS, CML or SSTL levels. The fully differential architecture and low propagation delay make it ideal for use in clock distribution circuits. The select pins have internal pulldown resistors. The SEL2 pin is the most significant bit and the binary number applied to the select pins will select the same numbered data input (i.e., 000 selects PCLK0, nPCLK0).
ICS
BLOCK DIAGRAM
PCLK...