IDT2309

IDT2309 3.3V ZERO DELAY CLOCK BUFFER COMMERCIAL AND INDUSTRIAL TEMPERATURE RANGES 3.3V ZERO DELAY CLOCK BUFFER IDT2309 FEATURES: Phase-Lock Loop Clock Distribution 10MHz to 133MHz operating frequency Distributes one clock input to one bank of five and one bankd of four outputs Separate output enable for each output bank Output Skew < 250ps Low jitter <200 ps cycle-to-cycle IDT2309-1 for Standard Drive IDT2309-1H for High Drive No external RC network required Operates at 3.3V VDD Available in SOIC and TSSOP packages DESCRIPTION: The IDT2309 is a high-speed phase-lock loop (PLL) clock buffer, designed to address high-speed clock distribution applications. The zero delay is achieved by aligning the phase between the incoming clock and the output clock, operable within the range of 10 to 133MHz. The IDT2309 is a 16-pin version of the IDT2305. The IDT2309 accepts one reference input, and drives two banks of four low skew clocks. The -1H version of this device operates at up to 133MHz frequency and has higher drive than the -1 device. All parts have on-chip PLLs which lock to an input clock on the REF pin. The PLL feedback is on-chip and is obtained from the CLKOUT pad. In the absence of an input clock, the IDT2309 enters power down, and the outputs are tri-stated. In this mode, the device will draw less than 25µA. The IDT2309 is characterized for both Industrial and Commercial operation. FUNCTIONAL BLOCK DIAGRAM 1 PLL REF 8 S2 S1 9 Control Logic ...