Crystal or Differential to Differential Clock Fanout Buffer
IDT8T39S10I
DATASHEET
General Description
The IDT8T39S10I ...
Crystal or Differential to Differential Clock Fanout Buffer
IDT8T39S10I
DATASHEET
General Description
The IDT8T39S10I is a high-performance clock fanout buffer. The input clock can be selected from two differential inputs or one crystal input. The internal oscillator circuit is automatically disabled if the crystal input is not selected. The crystal pin can be driven by single-ended clock when crystal is bypassed.The selected signal is distributed to ten differential outputs which can be configured as LVPECL, LVDS or HSCL outputs. In addition, an LV
CMOS output is provided. All outputs can be disabled into a high-impedance state. The device is designed for signal fanout of high-frequency, low phase-noise clock and data signal. The outputs are at a defined level when inputs are open circuit or tied to ground. It is designed to operate from a 3.3V or 2.5V core power supply, and either a 3.3V or 2.5V output operating supply.
Features
Two differential reference clock input pairs Differential input pairs can accept the following differential input
levels: LVPECL, LVDS, HCSL
Crystal Oscillator Interface Crystal input frequency range: 10MHz to 40MHz Maximum Output Frequency
LVPECL - 2GHz LVDS - 2GHz HCSL - 250MHz LV
CMOS - 250MHz
Two banks, each has five differential output pairs that can be
configured as LVPECL or LVDS or HCSL
One single-ended reference output with synchronous enable to
avoid clock glitch
Output skew: (Bank A and Bank B at the same output level)
70...