IDTQS3VH2861

IDTQS3VH2861 2.5V / 3.3V 10-BIT ACTIVE HIGH AND LOW ENABLE, HIGH BANDWIDTH SWITCH INDUSTRIAL TEMPERATURE RANGE QUICKSWITCH® PRODUCTS 2.5V / 3.3V 10-BIT FLOW-THROUGH PIN OUT, HIGH BANDWIDTH SWITCH IDTQS3VH2861 FEATURES: N channel FET switches with no parasitic diode to VCC – Isolation under power-off conditions – No DC path to VCC or GND – 5V tolerant in OFF and ON state 5V tolerant I/Os Flat RON characteristics over operating range Rail-to-rail switching 0 - 5V Bidirectional dataflow with near-zero delay: no added ground bounce Excellent RON matching between channels VCC operation: 2.3V to 3.6V High bandwidth LVTTL-compatible control Inputs Undershoot Clamp Diodes on all switch and control Inputs Low I/O capacitance, 4pF typical 25Ω resistors for low noise and line matching Available in QSOP package APPLICATIONS: Hot-swapping Low distortion analog switch Replaces mechanical relay ATM 25/155 switching DESCRIPTION: The QS3VH2861 HotSwitch is a high bandwidth bus switch with 10-bit flow-though pin out. The QS3VH2861, with 25Ω ON resistance and 1.35ns propagation delay, is ideal for line matching and low noise environments. The switches are controlled by active low enable (BE) control. In the ON state, the switches can pass signals up to 5V. In the OFF state, the switches offer very high impedence at the terminals. The combination of small propagation delay, high OFF impedance, and over-voltage tolerance makes the QS3VH2861 ideal for high pe...