ILD8150/ILD8150E
LED driver IC for high power LEDs with hybrid dimming down to 0.5%
Features
• DC/DC buck with hysteret...
ILD8150/ILD8150E
LED driver IC for high power LEDs with hybrid dimming down to 0.5%
Features
DC/DC buck with hysteretic current regulation Output current up to 1.5 A DC Integrated 80 V high-side
MOSFET switch with low RON Hybrid dimming to 0.5% of the target current Wide operating
voltage range 8 V to 80 V Cycle-by-cycle current limitation Under-
voltage lockout Thermal protection Flicker free operation Digital soft-start Pull-down transistor to avoid LED glowing
Potential applications
Electronic Control Gear (ECG) for LED luminaries
CBOOT
BOOT
DIM
SW
IOUT L
VOUT
D
SD
COUT
ILED
ILD8150
VIN
CS
VVIN
VCC
GND
CVCC
RCS
Figure 1
DC/DC buck constant current
Product validation
Qualified for industrial applications according to the relevant tests of JEDEC47/20/22.
Product type ILD8150 ILD8150E
Package PG-DSO-8 PG-DSO-8 with exposed pad
Datasheet www.infineon.com
Please read the sections "Important notice" and "Warnings" at the end of this document
V1.5 2022-06-02
ILD8150/ILD8150E
LED driver IC for high power LEDs with hybrid dimming down to 0.5% Description
Description
The ILD8150 is a 80 V DC/DC converter IC for LED applications to drive high-power LEDs. For applications operating close to SELV limits it provides a high safety
voltage margin. The buck LED driver IC is tailored for LEDs in general lighting applications with average currents up to 1.5 A using a high-side integrated switch. A complete set of features and protections...