IP178G

IP178G Data Sheet 8 Port 10/100 Ethernet Integrated Switch (85nm /Extreme Low Power, PWMT® and AFT® ) Features General Description 8 port Embedded 10/100 PHY Switch Controller Support 8 100BaseTX or 6 100Base TX + 2 FX 100M PHY support IEEE802.3az at full duplex 10M PHY only support 10BaseTe Support Auto MDI-MDIX function Power Management Tool (PWMT®) - APS, auto-power saving while Link-off - IEEE 802.3az protocol based power saving - WOL+®, light traffic power saving - PWD, force-off power saving Support Auto Factory Test (AFT®) Single Power 3.3V supply Built in 1.1V core voltage LDO Regulator Two Priority queues per port Support 802.1p & DiffServ based QoS QoS - Port base - 802.1p - IP DiffServ IPV4/IPV6 - TCP/UDP port number - Pins configure ports priority (VIP port) Support max forwarding packet length 1552/1536 bytes option Embedded 448K bits packet buffer Support port mirror function Support 1k MAC address Support broadcast storm protection Support port trunking (Link Aggregation) Support 16 VLAN (IEEE Std 802.1q) - Port-based/Tagged-based VLAN - Support Port-based insert, remove tag Built-in 50 ohm resistors for simplifying BOM 85nm Process ℃Package and operation temperature - IP178G: 68 Pin QFN, 0~70 IP178G is fabricated with advanced CMOS (85nm) technology and only requires a 3.3V single power supply. This feature makes IP178G used very low power consume, such as the full load operation (100Mbps full duplex 8 ports), it only takes 0.95W. IP178G also supports Pow...