IP267

SIMATIC S5 IP 267 Stepper Motor Controller Manual EWA 4NEB 812 6061-02a www.DataSheet4U.net SIMATIC® and STEP ® are registered trademarks of Siemens AG. Copyright © Siemens AG 1989 Subject to change without prior notice. The reproduction, transmission or use of this document or its contents is not permitted without express written authority. Offenders will be liable for damages. All rights including rights created by patent grant or registration of a utility model or design, are reserved. EWA 4NEB 812 6061-02a Preface Introduction System Overview Driving Stepper Motors with the IP 267 Module Description Addressing and Programming Notes on Operation Application Examples Function block for assigning parameters to the IP 267 Index 1 2 3 4 5 6 7 EWA 4NEB 812 6061-02a IP 267 Preface Preface The IP 267 intelligent I/O module generates programmable pulse trains for driving the power sections of stepper motors. The IP 267 has separate digital inputs for controlling positioning movements and signalling certain events to the CPU. The IP 267 can only be used in conjunction with programmable controllers of the S5-100U range. It operates with the following CPUs: CPU 100 (6ES5 100 - 8MA02 only) CPU 102 (without restrictions) CPU 103 (without restrictions). The IP 267 processes all the input and output signals necessary for approaching the required positions autonomously in an application-specific integrated circuit (ASIC). The CPU can, in the meantime, scan all signals pre...