IRSM005-800MH
Half-Bridge IPM for Low Voltage Applications
80A, 40V
Description
The IRSM005-800MH is a general purpose h...
IRSM005-800MH
Half-Bridge IPM for Low
Voltage Applications
80A, 40V
Description
The IRSM005-800MH is a general purpose half-bridge with integrated gate driver in an attractive 7x8mm PQFN package. It is a general purpose building block suitable for a variety of low
voltage applications where power density is of critical importance. Typical examples would be advanced motor drives, dc-to-ac and dcto-dc converters.
Features
Package with low thermal resistance and minimal parasitics Low on-resistance HEXFETs: 2.7 mΩ typ. Under
voltage lockout on logic supply Independent gate drive in phase with logic input Gate drive supply range from 10V to 20V Propagation delay matched to defined spec 3.3V, 5V and 15V logic input compatible RoHS compliant
Internal Electrical Schematic
Ordering Information
Orderable Part Number IRSM005800MH
IRSM005800MHTR
Package Type PQFN 7x8mm PQFN 7x8mm
1 www.irf.com © 2014 International Rectifier
Form Tray Tape and Reel
Quantity 1300 2000
March 19, 2014
IRSM005-800MH
Absolute Maximum Ratings
Absolute maximum ratings indicate sustained limits beyond which damage to the module may occur. These are not tested at manufacturing. All
voltage parameters are absolute
voltages referenced to VSS unless otherwise stated in the table. The thermal resistance rating is measured under board mounted and still air conditions.
Symbol
Description
VDS
MOSFET Drain-to-Source
Voltage
Io Maximum DC current per
MOSFET @ TC=25°C (Note1)
Pd Maximum Power di...