DatasheetsPDF.com

ISL23711 Datasheet

Part Number ISL23711
Manufacturers Renesas
Logo Renesas
Description Volatile Digitally Controlled Potentiometer
Datasheet ISL23711 DatasheetISL23711 Datasheet (PDF)

NOT RECOMMENDED FOR NEW DESIGNS DATASHEET NO RECOMMENDED REPLACEMENT contact our Technical Support Center at ISL23711 1-888-INTERSIL or www.intersil.com/tsc FN6127 Volatile Digitally Controlled Potentiometer (XDCP™) Terminal Voltage ±3V or ±5V, Rev 0.00 128 Taps I2C Serial Interface August 16, 2005 The Intersil ISL23711 is a digitally controlled potentiometer (XDCP). The device consists of a resistor array, wiper switches, and a control section. The wiper position is controlled by an .

  ISL23711   ISL23711






Part Number ISL23710
Manufacturers Renesas
Logo Renesas
Description Volatile Digitally Controlled Potentiometer
Datasheet ISL23711 DatasheetISL23710 Datasheet (PDF)

NOT RECOMMENDED FOR NEW DESIGNS DATASHEET RECOMMENDED REPLACEMENT PART ISL23710 X9015 FN6126 Volatile Digitally Controlled Potentiometer (XDCP™) Terminal Voltage ±3V or ±5V, Rev 0.00 128 Taps Up/Down Interface August 22, 2005 The Intersil ISL23710 is a digitally controlled potentiometer (XDCP). The device consists of a resistor array, wiper switches, and a control section. The wiper position is controlled by a Up/Down interface. The potentiometer is implemented by a resistor array comp.

  ISL23711   ISL23711







Volatile Digitally Controlled Potentiometer

NOT RECOMMENDED FOR NEW DESIGNS DATASHEET NO RECOMMENDED REPLACEMENT contact our Technical Support Center at ISL23711 1-888-INTERSIL or www.intersil.com/tsc FN6127 Volatile Digitally Controlled Potentiometer (XDCP™) Terminal Voltage ±3V or ±5V, Rev 0.00 128 Taps I2C Serial Interface August 16, 2005 The Intersil ISL23711 is a digitally controlled potentiometer (XDCP). The device consists of a resistor array, wiper switches, and a control section. The wiper position is controlled by an I2C interface. The potentiometer is implemented by a resistor array composed of 127 resistive elements and a wiper switching network. The wiper terminal can be connected to either end of the resistor array or at any one of the Tap Positions in between, providing 128 steps of resolution between RL and RH. The “position” of the wiper is determined by the value assigned to the volatile Wiper Register (WR). The WR can be directly written to and read from using standard I2C interface protocol.


2019-06-15 : SiHFBC40A    ISL29021    ISL28113    ISL28213    ISL28413    ISL28114    ISL28214    ISL28414    ISL29018    ISL29020   


@ 2014 :: Datasheetspdf.com ::
Semiconductors datasheet search & download site (Privacy Policy & Contact)