Uniplane Processors. ISL6323A Datasheet

ISL6323A Datasheet PDF


Part Number

ISL6323A

Description

Monolithic Dual PWM Hybrid Controller Powering AMD SVI Split-Plane And PVI Uniplane Processors

Manufacture

Intersil Corporation

Total Page 30 Pages
Datasheet
Download ISL6323A Datasheet



ISL6323A
www.DataSheet4U.com
®
Data Sheet
March 23, 2009
ISL6323A
FN6878.0
Monolithic Dual PWM Hybrid Controller
Powering AMD SVI Split-Plane and PVI
Uniplane Processors
The ISL6323A dual PWM controller delivers high efficiency
and tight regulation from two synchronous buck DC/DC
converters. The ISL6323A supports hybrid power control of
AMD processors which operate from either a 6-bit parallel
VID interface (PVI) or a serial VID interface (SVI). The dual
output ISL6323A features a multi-phase controller to support
uniplane VDD core voltage and a single phase controller to
power the Northbridge (VDDNB) in SVI mode. Only the
multi-phase controller is active in PVI mode to support
uniplane VDD only processors.
A precision uniplane core voltage regulation system is
provided by a two-to-four-phase PWM voltage regulator (VR)
controller. The integration of two power MOSFET drivers,
adding flexibility in layout, reduce the number of external
components in the multi-phase section. A single phase PWM
controller with integrated driver provides a second precision
voltage regulation system for the North Bridge portion of the
processor. This monolithic, dual controller with integrated
driver solution provides a cost and space saving power
management solution.
For applications which benefit from load line programming to
reduce bulk output capacitors, the ISL6323A features output
voltage droop. The multi-phase portion also includes
advanced control loop features for optimal transient
response to load apply and removal. One of these features
is highly accurate, fully differential, continuous DCR current
sensing for load line programming and channel current
balance. Dual edge modulation is another unique feature,
allowing for quicker initial response to high di/dt load
transients.
The ISL6323A supports Power Savings Mode by dropping
the number of phases to one when the PSI_L bit is set.
Ordering Information
PART NUMBER
PART
(Note)
MARKING
TEMP.
(°C)
PACKAGE PKG.
(Pb-free) DWG. #
ISL6323ACRZ* ISL6323A CRZ 0 to +70 48 Ld 7x7 QFN L48.7x7
ISL6323AIRZ* ISL6323A IRZ -40 to +85 48 Ld 7x7 QFN L48.7x7
*Add “-T” suffix for tape and reel. Please refer to TB347 for details on reel
specifications.
NOTE: These Intersil Pb-free plastic packaged products employ special
Pb-free material sets, molding compounds/die attach materials, and
100% matte tin plate plus anneal (e3 termination finish, which is RoHS
compliant and compatible with both SnPb and Pb-free soldering
operations). Intersil Pb-free products are MSL classified at Pb-free peak
reflow temperatures that meet or exceed the Pb-free requirements of
IPC/JEDEC J STD-020.
Features
• Processor Core Voltage Via Integrated Multi-Phase
Power Conversion
• Configuration Flexibility
- 2-Phase Operation with Internal Drivers
- 3- or 4-Phase Operation with External PWM Drivers
• PSI_L Support with Phase Shedding for Improved
Efficiency at Light Load
• Serial VID Interface Inputs
- Two Wire, Clock and Data, Bus
- Conforms to AMD SVI Specifications
• Parallel VID Interface Inputs
- 6-bit VID input
- 0.775V to 1.55V in 25mV Steps
- 0.375V to 0.7625V in 12.5mV Steps
• Precision Core Voltage Regulation
- Differential Remote Voltage Sensing
- ±0.6% System Accuracy Over-Temperature
- Adjustable Reference-Voltage Offset
• Optimal Processor Core Voltage Transient Response
- Adaptive Phase Alignment (APA)
- Active Pulse Positioning Modulation
• Fully Differential, Continuous DCR Current Sensing
- Accurate Load Line Programming
- Precision Channel Current Balancing
• Variable Gate Drive Bias: 5V to 12V
• Overcurrent Protection
• Multi-tiered Overvoltage Protection
• Selectable Switching Frequency up to 1MHz
• Simultaneous Digital Soft-Start of Both Outputs
• Processor NorthBridge Voltage Via Single Phase
Power Conversion
• Precision Voltage Regulation
- Differential Remote Voltage Sensing
- ±0.6% System Accuracy Over Temperature
• Serial VID Interface Inputs
- Two Wire, Clock and Data, Bus
- Conforms to AMD SVI Specifications
• Overcurrent Protection
• Continuous DCR Current Sensing
• Variable Gate Drive Bias: 5V to 12V
• Simultaneous Digital Soft-Start of Both Outputs
• Selectable Switching Frequency up to 1MHz
• Pb-Free Plus Anneal Available (RoHS Compliant)
1 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2009. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.

ISL6323A
www.PDaitnaSohueett4U.com
ISL6323A
ISL6323A
(48 LD QFN)
TOP VIEW
48 47 46 45 44 43 42 41 40 39 38 37
FB_NB 1
36 PWM4
ISEN_NB+ 2
35 PWM3
RGND_NB 3
34 PWROK
VID0/VFIXEN 4
33 PHASE1
VID1/SEL 5
32 UGATE1
VID2/SVD 6
VID3/SVC 7
49
GND
31 BOOT1
30 LGATE1
VID4 8
29 PVCC1_2
VID5 9
28 LGATE2
VCC 10
27 BOOT2
FS 11
RGND 12
26 UGATE2
25 PHASE2
13 14 15 16 17 18 19 20 21 22 23 24
Integrated Driver Block Diagram
PWM
SOFT-START
AND
FAULT LOGIC
GATE
CONTROL
LOGIC
SHOOT-
THROUGH
PROTECTION
PVCC
BOOT
UGATE
20KΩ
10KΩ
PHASE
LGATE
2 FN6878.0




@ 2014 :: Datasheetspdf.com ::
Semiconductors datasheet search & download site (Privacy Policy & Contact)