Conversion. ISO-200RMS-P2-O8 Datasheet

ISO-200RMS-P2-O8 Datasheet PDF

Part ISO-200RMS-P2-O8
Description 200mV AC or DC Small Signal Conversion
Feature SHENZHEN SUNYUAN TECHNOLOGY CO., LTD. RMS SERIES ISOLATION AMPLIFIER ISO-RMS-P-O www.DataSheet4U.com.
Manufacture YUAN
Datasheet
Download ISO-200RMS-P2-O8 Datasheet

SHENZHEN SUNYUAN TECHNOLOGY CO., LTD. RMS SERIES ISOLATION A ISO-200RMS-P2-O8 Datasheet





ISO-200RMS-P2-O8
SHENZHEN SUNYUAN TECHNOLOGY CO., LTD.
RMS SERIES ISOLATION AMPLIFIER ISO-RMS-P-O
www.DataSheet4U.com
PRECISION and LOW COST
ISO-RMS-P-0
ISOLATION AMPLIFIER
FEATURES:
APPLICATIONS:
Wide Signal input 0-1KHz
200mV AC or DC Small Signal Conversion.
High Linearity (Non-linearity<0.2%)
3-Port Mutual Isolation 1.5KVAC among Input, Output and
Auxiliary Power Supply
Auxiliary Power Supply: 12VDC, 24VDC
Accuracy: 0.1, 0.2
International Standard UL94-V0 Package
Flaming Retardant
24 PIN DIP Package or DIN Rail
Temperature Range: -45°C to +85°C
Analog Signal or Data Acquisition and Isolation
Measurements of AC or DC Signal RMS
Ground Loop Elimination
Measurements & Instrumentations
Transducer Signal Transmitting and Receiving
Long Distance Signal Transmitting
Signal Converter in Industrial Application
GENERAL DESCRIPTION
In general, the voltage-meter is used to test DC voltage signal, while by adding an AC/DC conversion circuit for AC signal testing.
Currently, the AC voltage-meters prefer to use a simple average value response AC/DC Converter to decrease the cost and predigest
the circuit. The common used average value response AC/DC Converter is of that a semi-wave or full wave line commutate type
composed by operational amplifier and diode. This design features high accuracy and linearity as well as its low cost and simplized
circuit design. But the disadvantage is that only can be applied to the application of testing standard sine wave voltage under no
distortion, and error will occur if test the distortion sine wave. Furthermore, it is also not applicable to test square, rectangle, triangle,
saw-tooth, and trapezium and ladder wave on account of the testing results is not in accordance with the fact.
The RMS Isolation Amplifier is designed to meet the requirements of electronic testing at the application where need high accuracy
testing of various wave as above mentioned. The core component of RMS Isolation Amplifier is the highly integrated module, and it is
configured and designed upon high accuracy amplifier and latest D/S calculation techniques. It can be used to test any type voltage or
current wave without considering waveform or distortion. Above all, the RMS Isolation Amplifier features high accuracy, high linearity,
wide dynamic current range, quick frequency response, and comprehensive testing applications. In addition, the product is easy to be
used with only a few external components linked.
INPUT SPECIFICATIONS:
Isolated Voltage
Auxiliary Power Supply Range:
Soldering Temperature (10s)
Minimum Load Output
1500VAC
+/- 10%Vin
+300°C
2 K
Note: Any input specifications from users hand exceed the above specified range will probably cause a permanent damage to the
module
Copyright @ Shenzhen Sunyuan Technology Co., Ltd.
Edition-SZSY-07-01
Printed in P.R.C January 2007 Page 1 of 4



ISO-200RMS-P2-O8
SHENZHEN SUNYUAN TECHNOLOGY CO., LTD.
RMS SERIES ISOLATION AMPLIFIER ISO-RMS-P-O
www.DataSheet4U.com
PRODUCT NOMENCLATURE
ISO-RMS-P-O
ISO: Product Series
RMS Input Range: 200mV Max
P: Auxiliary Power Supply
P1: 24VDC;
P2: 12VDC;
P3: 5VDC
P4: 15VDC;
P5: Users Defined
O: Output
O8: 0-2VDC;
O7: Users Defined
Input: 0-200mV AC or DC
Output:0-2V
Aux. Power Supply: 12VDC
Part Number:
ISO-200RMS-P2-O8
PARAMETERS:
Items
Isolated Voltage
Signal Input
Min RMS Input
CMRRI
Gain
Gain Temperature Drift
Non-linearity
Maladjusted Input Voltage
Input Impedance (Differential Mode)
Input Impedance (Common Mode)
Signal Output
Frequency Response
Loading Capability
Output Ripple
Voltage Temperature Drift
Auxiliary Power Supply
Voltage
Current
Ambient Temperature
Storage Temperature
Test Condition
AC / 50Hz / 1min
50 KGain Adj.
Vin<1V
Vout=10V
No Filtering
Users Defined
VD=12V(RL=2K)
TYPICAL CONNECTION: (See Figure 1)
0-10µ F
0-200mV
OFF
ON
2.7/3V
CMOS
CAV+
CAV-
IN1
IN2
GND1
EN
VD
Min.
Typ. Max.
Unit
1500
V (rms)
0.2 1
V
5 mV
7 100 µV /V
10 V/V
100 ppm/°C
0.2 0.5 %FSR
0.2 1 mV
8 M
100 M
2 10
V
1 KHz
2 K
10 mV
25 µV/°C
3.3 12 24 VDC
15 mA
-45 +85 °C
-55
+125
°C
ADJ
ADJ
Vout
GND2
GND
50K
Figure 1: Typical Connection
Copyright @ Shenzhen Sunyuan Technology Co., Ltd.
Edition-SZSY-07-01
Printed in P.R.C January 2007 Page 2 of 4




@ 2014 :: Datasheetspdf.com ::
Semiconductors datasheet search & download site (Privacy Policy & Contact)