DC-DC
10 Watts JCH Series
xppower.com
• 2:1 Input Range • Industry Standard Package • 1500 VDC Isolation • Continuous Short Circuit Protection • -40 °C to +100 °C Operating Temperature • UL Approved • Single & Dual Outputs • 3 Year Warranty
Specification
Input
Input Voltage Range
Input Current Input Reflected Ripple Current Input Filter Input Surge
• 12 V (9-18 VDC) 24 V (18-36 VDC) 48 V (36-72 VDC)
• See table • 35 mA rms through 12 µH inductor
• Pi network • 12 V models 25 VDC for 100 ms
.
DC-DC Converter
DC-DC
10 Watts JCH Series
xppower.com
• 2:1 Input Range • Industry Standard Package • 1500 VDC Isolation • Continuous Short Circuit Protection • -40 °C to +100 °C Operating Temperature • UL Approved • Single & Dual Outputs • 3 Year Warranty
Specification
Input
Input Voltage Range
Input Current Input Reflected Ripple Current Input Filter Input Surge
• 12 V (9-18 VDC) 24 V (18-36 VDC) 48 V (36-72 VDC)
• See table • 35 mA rms through 12 µH inductor
• Pi network • 12 V models 25 VDC for 100 ms
24 V models 50 VDC for 100 ms 48 V models 100 VDC for 100 ms
Output
Output Voltage
• See table
Voltage Balance
• ±1% (±2% for dual output 3.3 V models)
Minimum Load
• No minimum load required
Line Regulation
• ±0.5%
Load Regulation
• ±0.5% single outputs, ±1.0 dual outputs
Setpoint Accuracy
• ±1.0%
Ripple & Noise
• 100 mV pk-pk for 3.3 V to 15 V models, 150 mV pk-pk for 24 V models, 20 MHz bandwidth
Transient Response
• 3% max deviation, recovery to within 1% in 250 µs for a 25% load change
Temperature Coefficient
• 0.02%/°C
Overload Protection • 140% of full load
Short Circuit Protection • Trip & restart (hiccup mode) with auto recovery
Maximum Capacitive • See table Load
Start Up Delay
• <20 ms
General
Efficiency Isolation Voltage
Isolation Capacitance Isolation Resistance Switching Frequency Power Density MTBF
• See table • 1500 VDC Input to Output
1000 VDC Input to Case 1000 VDC Output to Case • 500 pF typical input to output
• 109Ω • 200 kHz typical • 12..