DC DC
30 Watts JTL Series
xppower.com
• 4:1 Input Range • High Power Density • Single, Dual and Triple Outputs • High ...
DC DC
30 Watts JTL Series
xppower.com
4:1 Input Range High Power Density Single, Dual and Triple Outputs High Efficiency Up to 91% Remote On/Off 1600 VDC Isolation 3 Year Warranty
Specification
Input
Input
Voltage Range Input Current Input Reflected Ripple Input Filter Under
voltage Lockout
Input Surge
24 V (9-36 VDC), 48 V (18-75 VDC) See table 20 mA pk-pk through 12 µH inductor Pi network 24 V models: ON 8.6 V, OFF 7.9 V typical
48 V models: ON 17.8 V, OFF 16 V typical 24 V models 50 VDC for 100 ms
48 V models 100 VDC for 100 ms
Output
Output
Voltage
See table
Output
Voltage Trim ±10% on single outputs models only
Minimum Load
No minimum load required for single and dual output models, 10% required on all outputs for triple output models
Line Regulation
±0.2% max for single and dual output models, ±1.0% main, ±5% auxiliary for triple output models
Load Regulation
Single output models: ±0.5% max Dual output models: ±1% max balanced outputs Triple output models: ±1% max main, ±5% auxiliaries
Cross Regulation
±5% for dual and triples output (see note 2)
Setpoint Accuracy
±1% (±5% for triple auxiliaries)
Start Up Time
30 ms typical
Ripple & Noise
100 mV or 1% pk-pk, whichever is greater single & dual output models, 50/75 mV pk-pk main/auxiliary outputs of triple output models, 20 MHz bandwidth (see note 3)
Transient Response
3% max deviation, recovery to within 1% in <250 µs for a 25% load change
Temp. Coef...