DC DC
40 Watts JTL Series
xppower.com
• 4:1 Input Range • High Power Density • Single and Dual Outputs • High Efficien...
DC DC
40 Watts JTL Series
xppower.com
4:1 Input Range High Power Density Single and Dual Outputs High Efficiency Up to 92% Remote On/Off 1600 VDC Isolation 3 Year Warranty
Specification
Input
Input
Voltage Range Input Current Input Reflected Ripple Current Input Reverse
Voltage Protection Under
voltage Lockout
Input Filter Input Surge
24 V (9-36 VDC), 48 V (18-75 VDC) See table 20 mA pk-pk through 12 µH inductor
None
24 V models: ON 8.6 V, OFF 7.9 V typical 48 V models: ON 17.8 V, OFF 16 V typical
Pi network 24 V models 50 VDC for 100 ms
48 V models 100 VDC for 100 ms
Output
Output
Voltage
See table
Output
Voltage Trim ±10%
Minimum Load
No minimum load required
Line Regulation
±0.5% max
Load Regulation
Single output models: ±0.5% max Dual output models: ±1% max balanced outputs
Cross Regulation
±5% for dual outputs (see note 2)
Setpoint Accuracy
±1%
Start Up Time
25 ms typical
Ripple & Noise
50 mV pk-pk max for 3.3 V & 5 V models, 75 mV pk-pk max for other single output models, 150 mV pk-pk max for dual output models, 20 MHz bandwidth, (see note 3)
Transient Response
3% max deviation, recovery to within 1% in <250 µs for a 25% load change
Temperature Coefficient
0.02%/°C
Over
voltage Protection 3.3 V models: 3.9 V typical 5 V models: 6.2 V typical 12 V models: 15 V typical 15 V models: 18 V typical ±12 V models: ±15 V typical ±15 V models: ±18 V typical
Overload Protection >130% of full load
Sh...