L6219

UNISONIC TECHNOLOGIES CO., LTD L6219 LINEAR INTEGRATED CIRCUIT DUAL FULL-BRIDGE PWM MOTOR DRIVER  DESCRIPTION The L6219 motor driver is designed to drive both windings of a bipolar stepper motor or bidirectionally control two dc motors. Both bridges are capable of sustaining 45V and include internal pulse-width modulation (PWM) control of the output current to 750mA .The outputs have been optimized for a low output saturation voltage drop (less than 1.8V total source plus sink at 500mA ). For PWM current control, the maximum output current is determined by the user’s selection of a reference voltage and sensing resistor. Two logic-level inputs select output current limits of 0, 33, 67,or 100% of the maximum level. A phase input to each bridge determines load current direction. The bridges include both ground clamp and flyback diodes for protection against inductive transients. Internally generated delays prevent cross-over currents when switching current direction. Special power-up sequencing is not required. Thermal protection circuitry disables the outputs if the chip temperature exceeds safe operating limits.  FEATURES *Interchangeable with SGS L6219 *750mA Continuous Output Current *45V Output Sustaining Voltage *Internal Clamp Diodes *Internal PWM Current Control *low Output Saturation Voltage *Internal Thermal Shutdown Circuitry  ORDERING INFORMATION Ordering Number Lead Free Halogen Free L6219L-S24-R L6219G-S24-R Package SOP-24 SOP-24 Packing Tape Ree...