DATA SHEET www.onsemi.com
Optical Image Stabilization (OIS) Controller & Driver
CMOS LSI
LC898121XA
Overview The LC898121XA is a system LSI integrating a digital signal
processing function for Optical Image Stabilization (OIS) and a saturation−driven H bridge driver function.
Features
Digital Signal Processing
• Built−in Digital Servo Circuit • Built−in Gyro Filter • AD Converter
♦ 12 Bit ♦ Input 3ch ♦ Equipped with a Sample−hold Circuit
• DA Converter
♦ 8 Bit ♦ Output 2ch
• Built−in Serial I/.
OIS Controller/Driver
DATA SHEET www.onsemi.com
Optical Image Stabilization (OIS) Controller & Driver
CMOS LSI
LC898121XA
Overview The LC898121XA is a system LSI integrating a digital signal
processing function for Optical Image Stabilization (OIS) and a saturation−driven H bridge driver function.
Features
Digital Signal Processing
• Built−in Digital Servo Circuit • Built−in Gyro Filter • AD Converter
♦ 12 Bit ♦ Input 3ch ♦ Equipped with a Sample−hold Circuit
• DA Converter
♦ 8 Bit ♦ Output 2ch
• Built−in Serial I/F Circuit (4−wire SPI or 2−wire I2C−Bus Interface) • Built−in Hall Bias Circuit • Built−in Hall Amp • Built−in OSC (Oscillator)
♦ Typ. 48 MHz
• Built−in LDO (Low Drop−Out Regulator)
♦ Generation Logic Power (Typ 1.8 V)
• Digital Gyro I/F for the Companies (Please Refer for the Details)
Motor Driver
• Saturation−drive H Bridge x2ch • IO max: 300 mA
Package
• WLCSP40, 2.44 mm x 3.94 mm, Thickness Max 0.65 mm • This is a Pb−Free and Halogen Free Device
WLCSP40, 2.44 x 3.94 CASE 567JB
MARKING DIAGRAM
8182 YMX##
17A
8121 = Specific Device Code Y = Year M = Month X = Assembly Location ## = Conversion Character Representing
Assembly Lot
ORDERING INFORMATION
Device
Package
Shipping†
LC898121XA−MH
WLCSP40, 2.44 x 3.94 (Pb−Free / Halogen Free)
4000 / Tape & Reel
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specification Brochure, BRD8011/D.
Power Supply Voltage
• DA/VGA: DAOPVDD = 2.6 V to 3.6 .