LGA775

www.DataSheet4U.com NH-U12P-LGA775 | Installation Manual the backplate’s screw sockets with the mainboard’s screwholes. Noctua LGA775 Mounting-Kit Installation Manual Thank you very much for choosing a Noctua cooler. This manual will guide you through the installation process step by step. Prior to installing the cooler, please consult the compatibility list on our website and verify that the cooler is fully compatible with your motherboard. Should you encounter any difficulties, please check the FAQs on our website and don’t hesitate to contact our support team at [email protected]. Noctua cannot be held responsible for any damage or losses caused by compatibility issues. Multilingual versions of this manual are available on our website: www.noctua.at Required mounting parts (from the LGA775-bag): Caution: The rubber foam square of the LGA backplate has to face the mainboard. Don’t remove the white protection film! Caution: Don’t forget to put 4 washers between the mainboard and the mounting bars to avoid damage to the mainboard. Choose the alignment of the mounting bars according to the desired final orientation of the cooler: Orientation A Orientation B Step 4: Applying thermal paste If there are residual traces of thermal paste or thermal pads on your CPU, please clean them off first. Press a small drop (4-5mm diameter) of NT-H1 onto the centre of the heat-spreader. Caution: Make sure that the straight sides of the mounting bars face the socket and the bulgings are p...