LGER433M(F11)
SAW Resonator
1. SCOPE
This specification shall cover the characteristics of 1-port SAW resonator with us...
LGER433M(F11)
SAW Resonator
1. SCOPE
This specification shall cover the characteristics of 1-port SAW resonator with used for remote-control security.
2. ELECTRICAL SPECIFICATION
DC
Voltage VDC AC
Voltage Vpp Operation temperature Storage temperature RF Power Dissipation Electronic Characteristics
Item Center Frequency Insertion Loss Quality Factor Unload Q 50Ω Loaded Q Temperature Turnover Temperature Stability Turnover Frequency Freq.temp.Coefficient Frequency Aging DC. Insulation Resistance
Motional Resistance R1
10V 10V50Hz/60Hz -20℃ to +85℃ -45℃ to +85℃ 0dBm
Unites MHz dB
Minimum 433.845
Typical 433.920 1.5 12,800 2,000
Maximum 433.995 2.5
℃ KHz ppm/℃2 ppm/yr MΩ Ω μH pF pF pF 1.7 1.0
39 fo±2.7 0.037 <±10
18 86 1.5 2.0 1.9
26
RF Equivalent Motional Inductance L1 RLC Model Motional Capacitance C1 Pin 1 to Pin 2 Staic Capacitance Transducer Static Capacitance
2.3
3. TEST CIRCUIT
http://www.luguang.cn
mail:
[email protected]
1
Free Datasheet http://www.datasheet4u.com/
LGER433M(F11)
SAW Resonator
4. DIMENSION
5. ENVIRONMENTAL CHARACTERISTICS
5-1 High temperature exposure Subject the device to +85℃ for 16 hours. Then release the filter into room conditions for 24 hours prior to the measurement. It shall fulfill specifications in table 1. 5-2 Low temperature exposure Subject the device to -20℃ for 16 hours. Then release the device into room conditions for 24 hours prior to the measurement. It shall fulfill specifications in table 1. the the
the the
http://ww...