LM10010
www.ti.com
SNVS717C – JULY 2011 – REVISED MARCH 2013
LM10010 VID Voltage Programmer for Point of Load Regulat...
LM10010
www.ti.com
SNVS717C – JULY 2011 – REVISED MARCH 2013
LM10010 VID
Voltage Programmer for Point of Load Regulator
Check for Samples: LM10010
FEATURES
1
2 Output Current Accuracy (-40°C to +125°C) Input
Voltage Range: 3V to 5.5V 6-Bit Current DAC That Connects Directly to
the Feedback Node of an External Regulator to Provide Output
Voltage Control Precision Enable to Support Custom UVLO WSON-10 3 mm x 3 mm Footprint, 0.5 mm Pitch Compatible With the TMS320C66XX DSP Smart Reflex Technology
APPLICATIONS
Broadband, Networking, and Wireless Communications
Notebook and Palmtop Computers, PDAs Portable Instruments Battery-Powered Equipment Powering Digital Loads With a 6-Bit, 4 Pin VID
Interface
DESCRIPTION
The LM10010 is a precision, digitally programmed device used to control the output
voltage of a DC/DC converter. The LM10010 outputs a DC current inversely proportional to a 6-bit input word. This current DAC output connects to the feedback pin of a regulator in order to adjust its output
voltage to a desired range and resolution set by the user. As the 6-bit word counts up, the output
voltage is adjusted higher based on the setting of the feedback resistors in the converter.
The LM10010 is designed to program point of load regulators with adjustable resistor feedback networks for VID (
Voltage Identification).
Typical Application Circuit
VIN 3V to 5.5V CIN
5,6,7
HTSSOP-20
LF
11-16
PVIN
SW
RF
3
EN
COUT
4 AVIN
CF
LM21215A-1
19
FB
optio...