Product Folder
Sample & Buy
Technical Documents
Tools & Software
Support & Community
LM10011
SNVS822A – DECEMBER 20...
Product Folder
Sample & Buy
Technical Documents
Tools & Software
Support & Community
LM10011
SNVS822A – DECEMBER 2012 – REVISED NOVEMBER 2014
LM10011 6/4-Bit VID Programmable Current DAC for Point of Load Regulators with Adjustable Start-Up Current
1 Features
1 1.0% Output Current Accuracy (0°C to 100°C) 1.25% Output Current Accuracy (–40°C to 125°C) Input
Voltage Range: 2.97 V to 5.5 V Pin Selectable VID Format (6- or 4-bit) 16 Selectable Start-Up Currents Precision Enable to Support Custom UVLO SON-10 3-mm × 3-mm Footprint, 0.5-mm Pitch Footprint Compatible with the LM10010
2 Applications
Broadband, Networking, and Wireless Communications
Notebook Power Solutions Portable Instruments Battery-Powered Equipment Powering Digital Loads with a 6-bit or 4-bit, 4-Pin
VID Interface
3 Description
The LM10011 is a precision, digitally programmable device used to control the output
voltage of a DC/DC converter. The LM10011 outputs a dc current proportional to a 6-bit or 4-bit input word. By connecting the IDAC_OUT pin to the feedback node of a regulator, the regulator output
voltage can be adjusted to a desired range and resolution set by the user. As the input word counts up, the output
voltage is adjusted higher based on the values of the feedback resistors in the converter.
The current from the IDAC_OUT pin on start-up is programmable by an external resistor to cover the range of 0 to 56.4 µA with 4 bits of resolution. The MODE pin allows programming...