LCD Module
SPEC No.
LC00307
MODEL No.
LM100SS1T522
PAGE
1
Precautions
1) Industrial(Mechanical) design of the product in which...
Description
SPEC No.
LC00307
MODEL No.
LM100SS1T522
PAGE
1
Precautions
1) Industrial(Mechanical) design of the product in which this LCD module will be incorporated must be made
so that the viewing angle characteristics of the LCD may be optimized.
This module’s viewing angle is illustrated in Fig.1.
y MIN. < viewing angle < y MAX. (For the specific values of y MIN., and y MAX., refer to the table
)
Please consider the optimum viewing conditions according to the purpose when installing the module.
Viewing direction + y
.y=0 (Normal line)
y
Panel surface
Fig.1 Definition of viewing angle
2) This module should be installed using mounting holes of metal bezel. When installing the module, pay attention and handle carefully not to allow any undue stress such as twist or bend. 3) Since the front polarizer is easily damaged. Please pay attention not to scratch on its face. It is recommended to use a transparent acrylic resin board or other type of protective panel on the surface of the LCD module to protect the polarizer, LCD panel, etc.. 4) If the surface of the LCD panel is required to be cleaned, wipe it swiftly with cotton or other soft cloth. If it is not still clear completely, blow on and wipe it. 5) Water droplets, etc. must be wiped off immediately since they may cause color changes, staining, etc., if it remained for a long time. 6) Since LCD is made of glass substrate, dropping the module or banging it against hard objects may cause cracking or fragmentation....
Similar Datasheet