LM139-SP, LM139A-SP
www.ti.com
SCLS720C – NOVEMBER 2010 – REVISED MARCH 2011
QUAD DIFFERENTIAL COMPARATOR
Check for Sa...
LM139-SP, LM139A-SP
www.ti.com
SCLS720C – NOVEMBER 2010 – REVISED MARCH 2011
QUAD DIFFERENTIAL COMPARATOR
Check for Samples: LM139-SP, LM139A-SP
FEATURES
1
QML-V Qualified, SMD 5962-7700801VCA, 5962-9673802VCA and 5962-9673802V9B
Rad-Tolerant: 40 kRad/sec (Si) TID (5962-9673802VCA and 5962-9673802V9B) (1)
– TID Dose Rate = 0.01 rad/sec (Si)
Wide Supply Ranges
– Single Supply: 2 V to 36 V (Tested to 30 V)
– Dual Supplies: ±1 V to ±18 V (Tested to ±15 V)
Low Supply-Current Drain Independent of Supply
Voltage: 0.8 mA (Typ)
Low Input Bias Current: 25 nA (Typ)
Low Input Offset Current: 3 nA (Typ) (LM139)
Low Input Offset
Voltage: 2 mV (Typ)
(1) Radiation tolerance is a typical value based upon initial device qualification with dose rate = 0.01 rad/sec. Radiation lot acceptance testing is available - contact factory for details.
Common-Mode Input
Voltage Range Includes Ground
Differential Input
Voltage Range Equal to Maximum-Rated Supply
Voltage: ±36 V
Low Output Saturation
Voltage
Output Compatible With TTL, MOS, and
CMOS
J PACKAGE (TOP VIEW)
2OUT 1OUT
VCC 1IN− 1IN+ 2IN− 2IN+
1 2 3 4 5 6 7
14 OUT3 13 OUT4 12 GND 11 4IN+ 10 4IN− 9 3IN+ 8 3IN−
DESCRIPTION/ORDERING INFORMATION
These devices consist of four independent
voltage comparators that are designed to operate from a single power supply over a wide range of
voltages. Operation from dual supplies also is possible, as long as the difference between the two supplies is 2 V to 36 V, and VCC is at leas...