LM2453 Monolithic Triple 6 nS CRT Driver With Integrated Clamp and G1 Blanking
April 2000
LM2453 Monolithic Triple 6 n...
LM2453 Monolithic Triple 6 nS CRT Driver With Integrated Clamp and G1 Blanking
April 2000
LM2453 Monolithic Triple 6 nS CRT Driver With Integrated Clamp and G1 Blanking
General Description
The AC2DC driver is an integrated high
voltage triple CRT driver circuit designed for use in color monitor applications. The input signal interface to the IC is a multiplexed signal containing both clamp and video signal information, relative to a 1.7 VDC reference. The IC contains three high gain, high input impedance, wide band
amplifiers which directly drive the RGB cathodes of a CRT. Each channel has its gain internally set to −52 and can drive CRT capacitive loads as well as resistive loads present in other applications, limited only by the package’s power dissipation. Integrated with the driver is triple clamp circuit for DC recovery of each of the AC coupled outputs. The DC clamp circuit amplifies the clamp signal that is multiplexed on the video signal input. The DC clamp
amplifiers are high gain, high input impedance
amplifiers, setting a low impedance DC level at the clamp output which can be used to restore the DC level of the cathode drive. Each channel has a gain that is internally set to +73. Also integrated within the package is a 40 VP-P vertical blanking driver that is designed to provide vertical retrace blanking on G1 of the CRT. This is a current limited, low impedance output capable of driving normal G1 decoupling capacitances via an external resistor. The output of t...