LM3678
www.ti.com
SNVS464C – APRIL 2008 – REVISED MAY 2013
High-Performance Miniature 1.5-A Step-Down DC-DC Converter...
LM3678
www.ti.com
SNVS464C – APRIL 2008 – REVISED MAY 2013
High-Performance Miniature 1.5-A Step-Down DC-DC Converter for Handheld Applications
Check for Samples: LM3678
FEATURES
1
2 VOUT = 0.8 V or 1.2 V VIN = 2.5 V to 5.5 V 1.5-A Maximum Load Capability 3.3-MHz (Typical) PWM Fixed Switching
Frequency Allows Use of 1-µH Inductor ±3% DC Output
Voltage Precision 0.01-µA (Typical) Shutdown Current Internal Synchronous Rectification for High
Efficiency Internal Soft Start Current Overload and Thermal Shutdown
Protection
APPLICATIONS
PDAs and Smart Phones Personal Media Players W-LAN USB Modem Applications Digital Still Cameras Portable Hard Disk Drives
DESCRIPTION
The LM3678 step-down DC-DC converter is optimized for powering low-
voltage circuits from a single Li-Ion cell battery and input
voltage rails from 2.5 V to 5.5 V. It provides up to 1.5-A load current, over the entire input
voltage range. LM3678 offers a 0.8V or 1.2V option. One of the pair of
voltages is set through the VSELECT pin.
LM3678 operates in PWM mode with a fixed frequency of 3.3 MHz. Internal synchronous rectification provides high efficiency during PWM mode operation. In shutdown mode, the device turns off and reduces battery consumption to 0.01 µA (typical).
The LM3678 is available in a 3mm x 3mm DSC-10 package. A high switching frequency of 3.3 MHz (typical) allows use of tiny surface-mount components. Only three external surface-mount components, an inductor and two cera...