Timer
LM555QML
www.ti.com
SNOSAP2C – AUGUST 2005 – REVISED APRIL 2013
LM555QML Timer
Check for Samples: LM555QML
FEATURES
...
Description
LM555QML
www.ti.com
SNOSAP2C – AUGUST 2005 – REVISED APRIL 2013
LM555QML Timer
Check for Samples: LM555QML
FEATURES
1
2 Direct Replacement for SE555/NE555 Timing from Microseconds through Hours Operates in Both Astable and Monostable
Modes Adjustable Duty Cycle Output can Source or Sink 200 mA Output and Supply TTL Compatible Temperature Stability Better than 0.005% per
°C Normally On and Normally Off Output
DESCRIPTION
The LM555 is a highly stable device for generating accurate time delays or oscillation. Additional terminals are provided for triggering or resetting if desired. In the time delay mode of operation, the time is precisely controlled by one external resistor and capacitor. For astable operation as an oscillator, the free running frequency and duty cycle are accurately controlled with two external resistors and one capacitor. The circuit may be triggered and reset on falling waveforms, and the output circuit can source or sink up to 200mA or drive TTL circuits.
APPLICATIONS
Precision Timing Pulse Generation Sequential Timing Time Delay Generation Pulse Width Modulation Pulse Position Modulation Linear Ramp Generator
CONNECTION DIAGRAM
Figure 1. Dual-In-Line Package
Figure 2. Metal Can Package
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. All trade...
Similar Datasheet