LM6584
www.ti.com
SNOSA44C – MAY 2003 – REVISED MARCH 2013
LM6584 TFT-LCD Quad, 13V RRIO High Output Current Operatio...
LM6584
www.ti.com
SNOSA44C – MAY 2003 – REVISED MARCH 2013
LM6584 TFT-LCD Quad, 13V RRIO High Output Current Operational Amplifier
Check for Samples: LM6584
FEATURES
1
(VS = 5V, TA = 25°C Typical Values Unless Specified)
Input Common Mode
Voltage 0.5V Beyond Rails
Output
Voltage Swing (RL = 2kΩ) 50mV from Rails
Output Short Circuit Current +310/−410mA Continuous Output Current 75mA Supply Current (Per Amp, No Load) 750μA Supply
Voltage Range 5V to 13V Unity Gain Stable −3dB Bandwidth (AV = +1) 24MHz Slew Rate 11V/μSec Settling Time 270ns SOIC and TSSOP Package Manufactured in Texas Instruments' State-of-
the-Art Bonded Wafer, Trench Isolated Complementary Bipolar VIP10 Technology for High Performance at Low Power Levels
APPLICATIONS
LCD Panel VCOM Driver LCD Panel Gamma Buffer
LCD Panel Repair Amp
DESCRIPTION
The LM6584 is a low power, high
voltage, rail-to-rail input-output amplifier ideally suited for LCD panel VCOM driver and gamma buffer applications. The LM6584 contains four unity gain stable
amplifiers in one package. It provides a common mode input ability of 0.5V beyond the supply rails, as well as an output
voltage range that extends to within 50mV of either supply rail. With these capabilities, the LM6584 provides maximum dynamic range at any supply
voltage. Operating on supplies ranging from 5V to 13V, while consuming only 750μA per amplifier, the LM6584 has a bandwidth of 24MHz (−3dB).
The LM6584 also features fast slewing and ...