LPS155-C

150 Watts LPS150 Series Total Power: 110-150 Watts Input Voltage: 85-132 / 170-264 VAC 220-300 VDC # of Outputs: Single Electrical Specs Input Input range 85-132 VAC or 170-264 VAC automatically selected. 220-300 VDC 47-63 Hz 38 A max, cold start @ 25°C 75% typical at full load FCC Class B conducted CISPR 22 Class B conducted EN55022 Class B conducted VDE 0878 PT3 Class B conducted <0.5 mA @ 50/60 Hz, 264 VAC input Frequency Inrush current Efficiency EMI filter Special Features Auto ranging input Remote sense Remote inhibit Power fail Single wire current sharing Built-in EMI filter Low output ripple Adjustable output 135 khz switching frequency Overvoltage protection Overload protection Optional cover (-C suffix). Safety ground leakage current Output Maximum power 110 W convection (75 W with cover) 150 W with 30 CFM forced air (130 W with cover) ±5% minimum 20 ms @ 110 W load, 115/230 VAC nominal line Short circuit protection. Case overload protected @ 110% to 145% above peak rating 5 V output: 5.7 to 6.7 VDC. Other outputs 10% to 25% above nominal output TTL Logic signal goes high 50-150 msec after 5 V output. It goes low at least 3 ms before loss of regulation. Requires an external TTL high signal to inhibit outputs. Compensates for 0.5 V lead drop minimum, will operate without remote sense connected. Reverse connection protected. Adjustment range Hold-up time Overload protection Overvoltage protection Environmental Operating temperature: 0...