Embedded Power for Business-Critical Continuity
LPS170 Series
175 Watts
Total Power: Input Voltage: # of Outputs:...
Embedded Power for Business-Critical Continuity
LPS170 Series
175 Watts
Total Power: Input
Voltage: # of Outputs: 100 - 175 Watts 85-264 VAC 120-300 VDC Single
Rev. 08.04.09_101 LPS170 Series of 3
Electrical Specifications
Special Features
Active power factor correction IEC EN61000-3-2 compliance Wide Range Adjustable output Remote sense on main output Single wire current sharing Power fail and remote inhibit Built-in EMI filter Low output ripple Over
voltage protection Overload protection Thermal overload protection DC power good 5 V standby output 12 V Aux output Optional cover (-C suffix)
Input
Input range: Frequency: Inrush current: Efficiency: EMI filter: 85-264 VAC; 120-300 VDC 47-63 Hz 38 A max, cold start @ 25°C 75% typical at full load FCC Class B conducted CISPR 22 Class B conducted EN55022 Class B conducted VDE 0878 PT3 Class B conducted 0.99 typical 1.0 mA @ 50/60 Hz, 264 VAC input
Power Factor: Safety ground leakage current:
Output
Maximum power: 110 W convection (75 W with cover) 175 W with 30 CFM forced air (130 W with cover) 2:1 wide ratio minimum 5 V @ 2 A regulated ±5% 20 ms @175 W load at nominal line Short circuit protection on all outputs. Case overload protected @ 110-145% above peak rating 12 V @ 1 A -5 %, +10%
Adjustment range:
Safety
VDE UL CB CSA CE NEMKO 0805/EN60950 (IEC950) UL1950 Certificate and report CSA 22.2-234 Level 3 Mark (LVD) EN 60950/EMKO-TUE
Standb...