EEPROM. M24C16-FMC5TG Datasheet

M24C16-FMC5TG Datasheet PDF

Part M24C16-FMC5TG
Description 16-Kbit serial I2C bus EEPROM
Feature M24C16-FMC5TG; M24C16-W M24C16-R M24C16-F Datasheet 16-Kbit serial I2C bus EEPROM TSSOP8 (DW) 169 mil width SO8 (.
Manufacture STMicroelectronics
Datasheet
Download M24C16-FMC5TG Datasheet




M24C16-FMC5TG
M24C16-W M24C16-R M24C16-F
Datasheet
16-Kbit serial I2C bus EEPROM
TSSOP8 (DW)
169 mil width
SO8 (MN)
150 mil width
UFDFPN8 (MC)
DFN8 - 2x3 mm
UFDFPN5 (MH)
DFN5 - 1.7x1.4 mm
Unsawn wafer
Product status link
M24C16-W
M24C16-R
M24C16-F
Features
• Compatible with following I2C bus modes:
– 400 kHz
– 100 kHz
• Memory array:
– 16 Kbit (2 Kbyte) of EEPROM
– Page size: 16 byte
• Single supply voltage:
– M24C16-W: 2.5 V to 5.5 V
– M24C16-R: 1.8 V to 5.5 V
– M24C16-F: 1.7 V to 5.5 V (full temperature range) and 1.6 V to 1.7 V
(limited temperature range)
• Write time:
– Byte write within 5 ms
– Page write within 5 ms
• Operating temperature range:
– from -40 °C up to +85 °C
• Random and sequential read modes
• Write protect of the whole memory array
• Enhanced ESD/latch-up protection
• More than 4 million Write cycles
• More than 200-year data retention
Packages
• SO8 ECOPACK2
• TSSOP8 ECOPACK2
• UFDFPN8 ECOPACK2
• UFDFPN5 ECOPACK2
• Unsawn wafer (each die is tested)
DS9194 - Rev 11 - October 2020
For further information contact your local STMicroelectronics sales office.
www.st.com



M24C16-FMC5TG
M24C16-W M24C16-R M24C16-F
Description
1
Description
The M24C16 is a 16-Kbit I2C-compatible EEPROM (electrically erasable programmable memory) organized as
2K x 8 bits.
The M24C16-W can be accessed (Read and Write) with a supply voltage from 2.5 V to 5.5 V, the M24C16-R can
be accessed (Read and Write) with a supply voltage from 1.8 V to 5.5 V, and the M24C16-F can be accessed with
a supply voltage from 1.7 V to 5.5 V (over the full temperature range) or with an extended supply voltage from
1.6 V to 1.7 V. The M24C16-F can also operate down to 1.6 V, under some restricting conditions.
All these devices operate with a clock frequency of 400 kHz (or lower).
Figure 1. Logic diagram
VCC
SCL
M24xxx
SDA
WC
VSS
MS30935V2
Signal name
SDA
SCL
WC
VCC
VSS
Table 1. Signal names
Function
Serial data
Serial clock
Write control
Supply voltage
Ground
Direction
I/O
Input
Input
-
-
1. NC: Not Connected
Figure 2. 8-pin package connections, top view
NC 1
NC 2
NC 3
VSS 4
8 VCC
7 WC
6 SCL
5 SDA
MS30936V2
DS9194 - Rev 11
page 2/40



M24C16-FMC5TG
M24C16-W M24C16-R M24C16-F
Description
Figure 3. UFDFPN5 (DFN5) package connections
VCC 1
VSS 2
SDA 3
ABCD
XYZW
5 WC
2 VSS
4 SCL
Top view
(marking side)
5
1
2
2
4
3
Bottom view
(pads side)
1. See Section 9 Package information for package dimensions, and how to identify pin 1
DS9194 - Rev 11
page 3/40







@ 2014 :: Datasheetspdf.com ::
Semiconductors datasheet search & download site (Privacy Policy & Contact)