M95P16-E

M95P16-I M95P16-E Datasheet Ultra low power 16 Mbit serial SPI page EEPROM with dual and quad outputs UFDFPN8 (2 x 3 mm) SO8N (4.9 x 6.0 mm) WLCSP8 (1.363 × 1.809 mm) Product status link M95P16-I M95P16-E Features Interface Supports serial peripheral interface (SPI) and dual/quad outputs Wide voltage range: VCC from 1.6 to 3.6 V Temperature range: – -40 °C to +85 °C (industrial) – -40 °C to +105 °C (extended) Fast read: – 50 MHz read single output – 80 MHz fast read single/dual/quad output with one dummy byte Memory 16 Mbit of page EEPROM – 32-Kbyte blocks, 4-Kbyte sectors – Page size: 512 bytes – Two identification pages Write endurance: – 500 kcycles on full temperature range Data retention: – 100 years – 10 years after 500 kcycles Ultra low power consumption 0.6 μA (typ) in Deep power-down mode 16 μA (typ) in Standby mode 800 μA (typ) for read single at 10 MHz 1.5 mA (typ) for page write Current peak control < 3 mA High write/erase performance Fast write/program/erase times: – 2.0 ms (typ) for byte and page write (includes auto erase and program) for 512 bytes – 1.2 ms (typ) for page program (512 bytes) – 1.1 ms (typ) for page erase – 1.3 ms (typ) for sector erase – 4.0 ms (typ) for block erase – 8 ms (typ) for chip erase Page program with buffer load DS13710 - Rev 1 - February 2023 For further information contact your local STMicroelectronics sales office. www.st.com Advanced features ECC for high memory reliability (DEC, TED) Schmitt ...