M95P32-I M95P32-E
Datasheet
Ultra low power 32-Mbit serial SPI page EEPROM with dual and quad outputs
UFDFPN8 (4 x 4 mm...
M95P32-I M95P32-E
Datasheet
Ultra low power 32-Mbit serial SPI page EEPROM with dual and quad outputs
UFDFPN8 (4 x 4 mm)
SO8N (4.9 x 6 mm)
WLCSP8 (2.608 x 1.531 mm)
Unsawn wafer
Product status link M95P32-I M95P32-E
Product label
Features
Interface Supports serial peripheral interface (SPI) and dual/quad outputs
High speed frequency
Clock frequency up to 80MHz Fast read single/dual/quad output with one dummy byte
– Dual output data transfer up to 160Mbits/s – Quad output data transfer up to 320Mbits/s
Memory 32 Mbits of page EEPROM 64-Kbyte blocks, 4-Kbyte sectors Page size: 512-byte Two additional 512-byte identification pages
Supply
voltage Wide
voltage range: VCC from 1.6 to 3.6 V
Temperature Operating temperature range:
– -40 °C to +85 °C (industrial) – -40 °C to +105 °C (extended)
Performance Write endurance: 500 kcycles on full temperature range Data retention:
– 100 years – 10 years after 500 kcycles
Ultra-low power consumption 0.6 μA (typ) in deep power-down mode 16 μA (typ) in Standby mode 800 μA (typ) for read single at 10 MHz 1.5 mA (typ) for page write Current peak control < 3 mA
DS12964 - Rev 4 - July 2023 For further information contact your local STMicroelectronics sales office.
www.st.com
M95P32-I M95P32-E
High write erase performance Fast Write/Prog/Erase times:
– 2 ms (typ) for byte and page write (includes auto erase and program) for 512 bytes – 1.2 ms (typ) for page program (512 bytes) – 1.1 ms (typ) for page erase – ...