MAX13013

www.DataSheet4U.com 19-3266; Rev 1; 8/04 +1.2V to +3.6V, 0.1µA, 100Mbps, Single-/Dual-/Quad-Level Translators General Description The MAX13013–MAX13017/MAX3023–MAX3028 single-/ dual-/quad-level translators provide the level shifting necessary to allow 100Mbps data transfer in a multivoltage system. Externally applied voltages, VCC and VL, set the logic levels on either side of the device. Logic signals present on the VL side of the device appear as a higher voltage logic signal on the VCC side of the device, and vice-versa. The MAX13013 single-, the MAX13014–MAX13017 dual-, and the MAX3023–MAX3028 (UCSP™ package) quad-level translators feature an enable (EN) input. The MAX3023–MAX3028 (TSSOP package) quad-level translators feature EN and EN inputs. When disabled, each device places all inputs/outputs on both sides in tri-state and reduces the VCC supply current to 0.03µA, and the VL supply current to 0.1µA. These devices operate at a guaranteed 100Mbps data rate for VL > 1.8V. The MAX13013–MAX13017/MAX3023–MAX3028 accept a +1.65V to +3.6V VCC voltage and a +1.2V to (VCC 0.4V) VL voltage, making them ideal for data transfer between low-voltage ASICs/programmable logic devices (PLDs) and higher voltage systems. The MAX13013 is available in 3 x 2 UCSP and 6-pin SC70 packages. The MAX13014–MAX13017 are available in 3 x 3 UCSP and 8-pin SOT23 packages. The MAX3023–MAX3028 are available in 4 x 3 UCSP and 14-pin TSSOP packages. All devices operate over the extended -40°C to +85°C ...