DatasheetsPDF.com

MAX351 Datasheet

Part Number MAX351
Manufacturers Maxim
Logo Maxim
Description Precision / Quad / SPST Analog Switches
Datasheet MAX351 DatasheetMAX351 Datasheet (PDF)

19-0212; Rev 1; 4/94 Precision, Quad, SPST Analog Switches _______________General Description The MAX351/MAX352/MAX353 are precision, quad, single-pole single-throw (SPST) analog switches. The MAX351 has four normally closed (NC), and the MAX352 has four normally open (NO) switches. The MAX353 has two NO and two NC switches. All three parts offer low on resistance (less than 35Ω), guaranteed to match within 2Ω between channels and to remain flat over the analog signal range (∆3Ω max). They also.

  MAX351   MAX351






Part Number MAX359
Manufacturers Maxim
Logo Maxim
Description Fault-Protected Analog Multiplexer
Datasheet MAX351 DatasheetMAX359 Datasheet (PDF)

.

  MAX351   MAX351







Part Number MAX3580
Manufacturers Maxim Integrated Products
Logo Maxim Integrated Products
Description Direct Conversion TV Tuner
Datasheet MAX351 DatasheetMAX3580 Datasheet (PDF)

MAX3580 EVALUATION KIT AVAILABLE Direct-Conversion TV Tuner General Description The MAX3580 fully integrated, direct-conversion TV tuner is designed for Digital Video Broadcasting-Terrestrial (DVB-T) applications. The integrated tuner covers a 170MHz to 230MHz input frequency range for the VHF-III band and 470MHz to 878MHz for the UHF band. The MAX3580 direct-conversion tuner integrates an RF input switch and a multiband tracking filter, allowing low-power tuner-on-board applications without t.

  MAX351   MAX351







Part Number MAX358
Manufacturers Maxim
Logo Maxim
Description Fault-Protected Analog Multiplexer
Datasheet MAX351 DatasheetMAX358 Datasheet (PDF)

.

  MAX351   MAX351







Part Number MAX3558
Manufacturers Maxim
Logo Maxim
Description Quad-Output LNA
Datasheet MAX351 DatasheetMAX3558 Datasheet (PDF)

19-3025; Rev 1; 6/06 KIT ATION EVALU E L B AVAILA Quad-Output LNA with AGC for Cable TV Applications General Description Features ♦ Quad Outputs with Independent AGCs and Shutdown ♦ 50MHz to 878MHz Broadband Operation ♦ Integrated Power Detector ♦ High Linearity: 15.6dBm IIP3 MAX3558 The MAX3558 broadband quad-output low-noise amplifier (LNA) is designed for digital set tops and digital terrestrial applications. The LNA covers a 50MHz to 878MHz input frequency range, while integrating a sepa.

  MAX351   MAX351







Part Number MAX355
Manufacturers Maxim
Logo Maxim
Description Fault-Protected Analog Multiplexers
Datasheet MAX351 DatasheetMAX355 Datasheet (PDF)

19-0389; Rev. 2; 9/96 Fault-Protected Analog Multiplexers _______________General Description The MAX354/MAX355 fault-protected multiplexers (muxes) use a series N-channel, P-channel, N-channel structure that protects the devices from overvoltage up to 40V beyond the supply rails during power-up, powerdown, and fault conditions. The MAX354/MAX355 also protect sensitive circuit components against voltages near or beyond the normal supplies. The MAX354 single 8-channel mux and the MAX355 dual 4-ch.

  MAX351   MAX351







Precision / Quad / SPST Analog Switches

19-0212; Rev 1; 4/94 Precision, Quad, SPST Analog Switches _______________General Description The MAX351/MAX352/MAX353 are precision, quad, single-pole single-throw (SPST) analog switches. The MAX351 has four normally closed (NC), and the MAX352 has four normally open (NO) switches. The MAX353 has two NO and two NC switches. All three parts offer low on resistance (less than 35Ω), guaranteed to match within 2Ω between channels and to remain flat over the analog signal range (∆3Ω max). They also offer low leakage (less than 250pA at +25°C and less than 6nA at +85°C) and fast switching (turn-on time less than 175ns and turn-off time less than 145ns). The MAX351/MAX352/MAX353 are fabricated with Maxim’s new improved 44V silicon-gate process. Design improvements guarantee extremely low charge injection (10pC), low power consumption (35µW), and electrostatic discharge (ESD) greater than 2000V. The 44V maximum breakdown voltage allows rail-to-rail analog signal handling. These monolithic switches operate with a single positive supply (+10V to +30V) or with split supplies (±4.5V to ±20V) while retaining CMOS-logic input compatibility and fast switching. CMOS inputs provide reduced input loading. ____________________________Features o Low On Resistance < 22Ω Typical (35Ω Max) o Guaranteed Matched On Resistance Between Channels < 2Ω o Guaranteed Flat On Resistance Over Analog Signal Range ∆3Ω Max o Guaranteed Charge Injection < 10pC o Guaranteed Off-Channel Leakage < 6nA at +85°C o .


2005-06-13 : MCR516x    IS1U621    IS1U60    IS1U20    IS1682    IS1640    IS1622    IS1604    NE5750    NE5752   


@ 2014 :: Datasheetspdf.com ::
Semiconductors datasheet search & download site (Privacy Policy & Contact)