DatasheetsPDF.com

MAX4234 Datasheet

Part Number MAX4234
Manufacturers Maxim Integrated
Logo Maxim Integrated
Description Rail-to-Rail I/O Op Amps
Datasheet MAX4234 DatasheetMAX4234 Datasheet (PDF)

MAX4230–MAX4234 High-Output-Drive, 10MHz, 10V/μs, Rail-to-Rail I/O Op Amps with Shutdown in SC70 General Description The MAX4230–MAX4234 single/dual/quad, high-output drive CMOS op amps feature 200mA of peak output current, rail-to-rail input, and output capability from a single 2.7V to 5.5V supply. These amplifiers exhibit a high slew rate of 10V/μs and a gain-bandwidth product (GBWP) of 10MHz. The MAX4230–MAX4234 can drive typical headset levels (32Ω), as well as bias an RF power amplifier (.

  MAX4234   MAX4234






Part Number MAX4239
Manufacturers Maxim
Logo Maxim
Description Ultra-Low Offset/Drift / Low-Noise / Precision SOT23 Amplifiers
Datasheet MAX4234 DatasheetMAX4239 Datasheet (PDF)

MAX4238/MAX4239 Ultra-Low Offset/Drift, Low-Noise, Precision SOT23 Amplifiers General Description The MAX4238/MAX4239 are low-noise, low-drift, ultrahigh precision amplifiers that offer near-zero DC offset and drift through the use of patented autocorrelating zeroing techniques. This method constantly measures and compensates the input offset, eliminating drift over time and temperature and the effect of 1/f noise. Both devices feature rail-to-rail outputs, operate from a single 2.7V to 5.5V s.

  MAX4234   MAX4234







Part Number MAX4238
Manufacturers Maxim
Logo Maxim
Description Ultra-Low Offset/Drift / Low-Noise / Precision SOT23 Amplifiers
Datasheet MAX4234 DatasheetMAX4238 Datasheet (PDF)

MAX4238/MAX4239 Ultra-Low Offset/Drift, Low-Noise, Precision SOT23 Amplifiers General Description The MAX4238/MAX4239 are low-noise, low-drift, ultrahigh precision amplifiers that offer near-zero DC offset and drift through the use of patented autocorrelating zeroing techniques. This method constantly measures and compensates the input offset, eliminating drift over time and temperature and the effect of 1/f noise. Both devices feature rail-to-rail outputs, operate from a single 2.7V to 5.5V s.

  MAX4234   MAX4234







Part Number MAX4237
Manufacturers Maxim
Logo Maxim
Description SOT23 / Very High Precision / 3V/5V Rail-to-Rail Op Amps
Datasheet MAX4234 DatasheetMAX4237 Datasheet (PDF)

19-2110; Rev 0; 8/01 SOT23, Very High Precision, 3V/5V Rail-to-Rail Op Amps General Description The MAX4236/MAX4237 are high-precision op amps that feature an exceptionally low offset voltage and offset voltage temperature coefficient without using any chopper techniques. The MAX4236 and MAX4237 have a typical large-signal, open-loop voltage gain of 120dB. These devices have an ultra-low input-bias current of 1pA. The MAX4236 is unity-gain stable with a gainbandwidth product of 1.7MHz, while th.

  MAX4234   MAX4234







Part Number MAX4236
Manufacturers Maxim
Logo Maxim
Description SOT23 / Very High Precision / 3V/5V Rail-to-Rail Op Amps
Datasheet MAX4234 DatasheetMAX4236 Datasheet (PDF)

19-2110; Rev 0; 8/01 SOT23, Very High Precision, 3V/5V Rail-to-Rail Op Amps General Description The MAX4236/MAX4237 are high-precision op amps that feature an exceptionally low offset voltage and offset voltage temperature coefficient without using any chopper techniques. The MAX4236 and MAX4237 have a typical large-signal, open-loop voltage gain of 120dB. These devices have an ultra-low input-bias current of 1pA. The MAX4236 is unity-gain stable with a gainbandwidth product of 1.7MHz, while th.

  MAX4234   MAX4234







Rail-to-Rail I/O Op Amps

MAX4230–MAX4234 High-Output-Drive, 10MHz, 10V/μs, Rail-to-Rail I/O Op Amps with Shutdown in SC70 General Description The MAX4230–MAX4234 single/dual/quad, high-output drive CMOS op amps feature 200mA of peak output current, rail-to-rail input, and output capability from a single 2.7V to 5.5V supply. These amplifiers exhibit a high slew rate of 10V/μs and a gain-bandwidth product (GBWP) of 10MHz. The MAX4230–MAX4234 can drive typical headset levels (32Ω), as well as bias an RF power amplifier (PA) in wireless handset applications. The MAX4230 comes in a tiny 5-pin SC70 package and the MAX4231, single with shutdown, is offered in a 6-pin SC70 package and in 1.5mm x 1.0mm UCSP and thin μDFN packages. The dual op-amp MAX4233 is offered in the space-saving 10-bump chip-scale package (UCSP™), providing the smallest footprint area for a dual op amp with shutdown. These op amps are designed to be part of the PA control circuitry, biasing RF PAs in wireless headsets. The MAX4231/ .


2017-12-11 : SL310    SL38    SL36    SSL34    SL34    SL35    SL33    SL32    SL34    SL33   


@ 2014 :: Datasheetspdf.com ::
Semiconductors datasheet search & download site (Privacy Policy & Contact)