19-1059; Rev 0; 11/07
Overvoltage-Protection Controller with USB ESD Protection
www.datasheet4u.com
General Descriptio...
19-1059; Rev 0; 11/07
Over
voltage-Protection Controller with USB ESD Protection
www.datasheet4u.com
General Description
o o o o
Features
Input
Voltage Protection Up to +28V Integrated Low RON (100mΩ) nFET Switch Internal Overcurrent Protection 1.5A (min) Overcurrent Protection (Autoretry)
MAX4987AE/MAX4987BE
The MAX4987AE/MAX4987BE are over
voltage protection devices with built-in ESD protection for USB data lines. These devices feature a low 100mΩ (typ) RON internal nFET switch and protect low-
voltage systems against
voltage faults up to +28V. When the input
voltage exceeds the over
voltage threshold or decreases below the under
voltage threshold, the internal nFET switch is turned off to prevent damage to the protected components. All switches feature a minimum 1.5A current-limit protection. During a short-circuit occurrence, the switch operates in an autoretry mode where the internal nFET switch is turned on to check if the fault has been removed. The autoretry interval is 30ms, and if the fault is removed, the nFET switch remains on. The MAX4987AE/MAX4987BE feature low-capacitance (3pF) ESD protection for USB data lines that allow transmission of high-speed USB 2.0 signals. The over
voltage threshold (OVLO) is preset to 6.15V. The under
voltage thresholds (UVLO) are preset to 2.55V (MAX4987AE) or 4.2V (MAX4987BE). When the input
voltage drops below the under
voltage (UVLO) threshold, the devices enter a low-current standby mode. All devices are offered in a small 2mm x 3mm...