19-3312; Rev 0; 7/04
T AVAILABLE EVALUATION KI
www.DataSheet4U.com
Power IC with Integrated MOSFETs for Isolated IEEE ...
19-3312; Rev 0; 7/04
T AVAILABLE EVALUATION KI
www.DataSheet4U.com
Power IC with Integrated
MOSFETs for Isolated IEEE 802.3af PD and Telecom Power-Supply Applications
General Description
The MAX5074 isolated PWM power IC features integrated switching power
MOSFETs connected in a
voltageclamped, two-transistor, power-circuit configuration. This device can be used in both forward and flyback configurations with a wide input
voltage range from 11V to 76V and up to 15W of output power. The
voltage-clamped power topology enables full recovery of stored magnetizing and leakage inductive energy for enhanced efficiency and reliability. A lookahead signal for driving secondary-side synchronous rectifiers can be used to increase efficiency. A wide array of protection features includes UVLO, overtemperature shutdown, and short-circuit protection with hiccup current limit for enhanced performance and reliability. Operation up to 500kHz allows smaller external magnetics and
capacitors. The MAX5074 is rated for operation over the -40°C to +125°C temperature range and is available in a 20-pin TSSOP package. Warning: The MAX5074 is designed to work with high
voltages. Exercise caution. ♦ No Reset Winding Required ♦ Up to 15W Output Power ♦ Bias
Voltage Regulator with Automatic High
Voltage Supply Turn-Off ♦ 11V to 76V Wide Input
Voltage Range ♦ Integrated High-
Voltage 0.4Ω Power
MOSFETs ♦ Feed-Forward
Voltage-Mode Control For Fast Input Transient Rejection ♦ Programmable Brownout Undervolta...