DatasheetsPDF.com

MAX776 Datasheet

Part Number MAX776
Manufacturers Maxim
Logo Maxim
Description -5V/-12V/-15V or Adjustable / High-Efficiency / Low IQ Inverting DC-DC Controllers
Datasheet MAX776 DatasheetMAX776 Datasheet (PDF)

MAX774/MAX775/MAX776 19-0191; Rev 2; 12/02 EVAALVUAAILTAIOBNLEKIT -5V/-12V/-15V or Adjustable, High-Efficiency, Low IQ Inverting DC-to-DC Controllers General Description The MAX774/MAX775/MAX776 inverting switching regulators deliver high efficiency over three decades of load current. A unique current-limited, pulsefrequency modulated (PFM) control scheme provides the benefits of pulse-width modulation (high efficiency with heavy loads), while using less than 100µA of supply current (vs. 2mA t.

  MAX776   MAX776






Part Number MAX779L
Manufacturers Maxim
Logo Maxim
Description Low-Voltage Input / 3V/3.3V/5V/ Adjustable Output / Step-Up DC-DC Converters
Datasheet MAX776 DatasheetMAX779L Datasheet (PDF)

19-0186; Rev 2; 7/96 NUAL KIT MA ATION U EET L H A S V E TA WS DA FOLLO Low-Voltage Input, 3V/3.3V/5V/ Adjustable Output, Step-Up DC-DC Converters ____________________________Features o 1V to 4.5V Input Guarantees Start-Up Under Load o Up to 210mA Output o Load Fully Disconnected in Shutdown o 82% Efficiency o Output in Regulation with Input Voltage above Output Voltage o Internal 1A Power Switch and Active Rectifier o Adjustable Current Limit Allows Low-Cost Inductors o 190µA No Load Supply C.

  MAX776   MAX776







Part Number MAX77976
Manufacturers Maxim Integrated
Logo Maxim Integrated
Description 1-Cell Li+ Battery Charger
Datasheet MAX776 DatasheetMAX77976 Datasheet (PDF)

EVALUATION KIT AVAILABLE Click here to ask about the production status of specific part numbers. MAX77975/MAX77976 19VIN, 3.5/5.5A 1-Cell Li+ Battery Charger with Smart Power Selector and OTG for USBC PD General Description The MAX77975/MAX77976 is a high-performance high-input 3.5/5.5A fast charger with Smart Power SelectorTM. The IC can operate as a reverse boost without an additional inductor, allowing the battery to share its power through the charging port and is voltage programmable f.

  MAX776   MAX776







Part Number MAX77975
Manufacturers Maxim Integrated
Logo Maxim Integrated
Description 1-Cell Li+ Battery Charger
Datasheet MAX776 DatasheetMAX77975 Datasheet (PDF)

EVALUATION KIT AVAILABLE Click here to ask about the production status of specific part numbers. MAX77975/MAX77976 19VIN, 3.5/5.5A 1-Cell Li+ Battery Charger with Smart Power Selector and OTG for USBC PD General Description The MAX77975/MAX77976 is a high-performance high-input 3.5/5.5A fast charger with Smart Power SelectorTM. The IC can operate as a reverse boost without an additional inductor, allowing the battery to share its power through the charging port and is voltage programmable f.

  MAX776   MAX776







Part Number MAX77961
Manufacturers Maxim Integrated
Logo Maxim Integrated
Description USB-C Buck-Boost Charger
Datasheet MAX776 DatasheetMAX77961 Datasheet (PDF)

EVALUATION KIT AVAILABLE Click here to ask about the production status of specific part numbers. MAX77960/MAX77961 25VIN 3A/6AOUT USB-C Buck-Boost Charger with Integrated FETs for 2S/3S Li-Ion Batteries General Description The MAX77960/MAX77961 are high-performance wideinput 3A (MAX77960)/6A (MAX77961) buck-boost chargers with Smart Power Selector™ and operate as a reverse buck converter without an additional inductor, allowing the ICs to power USB on-the-go (OTG) accessories. The devices i.

  MAX776   MAX776







Part Number MAX77960
Manufacturers Maxim Integrated
Logo Maxim Integrated
Description USB-C Buck-Boost Charger
Datasheet MAX776 DatasheetMAX77960 Datasheet (PDF)

EVALUATION KIT AVAILABLE Click here to ask about the production status of specific part numbers. MAX77960/MAX77961 25VIN 3A/6AOUT USB-C Buck-Boost Charger with Integrated FETs for 2S/3S Li-Ion Batteries General Description The MAX77960/MAX77961 are high-performance wideinput 3A (MAX77960)/6A (MAX77961) buck-boost chargers with Smart Power Selector™ and operate as a reverse buck converter without an additional inductor, allowing the ICs to power USB on-the-go (OTG) accessories. The devices i.

  MAX776   MAX776







-5V/-12V/-15V or Adjustable / High-Efficiency / Low IQ Inverting DC-DC Controllers

MAX774/MAX775/MAX776 19-0191; Rev 2; 12/02 EVAALVUAAILTAIOBNLEKIT -5V/-12V/-15V or Adjustable, High-Efficiency, Low IQ Inverting DC-to-DC Controllers General Description The MAX774/MAX775/MAX776 inverting switching regulators deliver high efficiency over three decades of load current. A unique current-limited, pulsefrequency modulated (PFM) control scheme provides the benefits of pulse-width modulation (high efficiency with heavy loads), while using less than 100µA of supply current (vs. 2mA to 10mA for PWM converters). The result is high efficiency over a wide range of loads. These ICs also use tiny external components; their high switching frequency (up to 300kHz) allows for less than 5mm diameter surface-mount magnetics. The MAX774/MAX775/MAX776 accept input voltages from 3V to 16.5V, and have preset output voltages of -5V, -12V, and -15V, respectively. Or, the output voltage can be user-adjusted with two resistors. Maximum VIN - VOUT differential voltage is limited only by the breakdown voltage of the chosen external switch transistor. These inverters use external P-channel MOSFET switches, allowing them to power loads up to 5W. If less power is required, use the MAX764/MAX765/MAX766 inverting switching regulators with on-board MOSFETs. Applications LCD-Bias Generators High-Efficiency DC-to-DC Converters Battery-Powered Applications Data Communicators Features o 85% Efficiency for 5mA to 1A Load Currents o Up to 5W Output Power o 100µA (max) Supply Current o 5µA (max) .


2005-05-02 : MN101C49K    MN101C49    C4900    D432-xxx    SDA01    SDA03    SDA04    SDA05    sda12    SDA2208-3   


@ 2014 :: Datasheetspdf.com ::
Semiconductors datasheet search & download site (Privacy Policy & Contact)