MAX803 Series, NCP803 Series
Very Low Supply Current 3-Pin Microprocessor Reset Monitor
The MAX803/NCP803 is a cost−eff...
MAX803 Series, NCP803 Series
Very Low Supply Current 3-Pin Microprocessor Reset Monitor
The MAX803/NCP803 is a cost−effective system supervisor circuit designed to monitor VCC in digital systems and provide a reset signal to the host processor when necessary. No external components are required.
The reset output is driven active within 10 msec of VCC falling through the reset
voltage threshold. Reset is maintained active for a timeout period which is trimmed by the factory after VCC rises above the reset threshold. The MAX803/NCP803 has an open drain active−low RESET output. Both devices are available in SOT−23 and SC−70 packages.
The MAX803/NCP803 is optimized to reject fast transient glitches on the VCC line. Low supply current of 0.5 mA (VCC = 3.2 V) make these devices suitable for battery powered applications.
Features
Precision VCC Monitor for 1.5 V, 2.5 V, 3.0 V, 3.3 V, and 5.0 V
Supplies
Precision Monitoring
Voltages from 1.2 V to 4.9 V Available
in 100 mV Steps
Four Guaranteed Minimum Power−On Reset Pulse Width Available
(1 ms, 20 ms, 100 ms, and 140 ms)
RESET Output Guaranteed to VCC = 1.0 V Low Supply Current VCC Transient Immunity No External Components Wide Operating Temperature: −40°C to 105°C These Devices are Pb−Free and are RoHS Compliant
Typical Applications
Computers Embedded Systems Battery Powered Equipment Critical Microprocessor Power Supply Monitoring
VCC
C = 100 nF
VCC MAX803 NCP803
RESET
Rpull−up
VCC mP
RESET
GND
GND
...