MC74HC03A
Quad 2-Input NAND Gate
with Open-Drain Outputs
High−Performance Silicon−Gate CMOS
The MC74HC03A is identical ...
MC74HC03A
Quad 2-Input NAND Gate
with Open-Drain Outputs
High−Performance Silicon−Gate
CMOS
The MC74HC03A is identical in pinout to the LS03. The device inputs are compatible with Standard
CMOS outputs; with pullup resistors, they are compatible with LSTTL outputs.
The HC03A NAND gate has, as its outputs, a high−performance MOS N−Channel transistor. This NAND gate can, therefore, with a suitable pullup resistor, be used in wired−AND applications. Having the output characteristic curves given in this data sheet, this device can be used as an LED driver or in any other application that only requires a sinking current.
Features
Output Drive Capability: 10 LSTTL Loads With Suitable Pullup
Resistor
Outputs Directly Interface to
CMOS, NMOS and TTL High Noise Immunity Characteristic of
CMOS Devices Operating
Voltage Range: 2.0 to 6.0 V Low Input Current: 1 mA In Compliance With the JEDEC Standard No. 7 A Requirements Chip Complexity: 28 FETs or 7 Equivalent Gates NLV Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC−Q100 Qualified and PPAP Capable
These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
LOGIC DIAGRAM VCC
PIN 14 = VCC PIN 7 = GND
* Denotes open-drain outputs
OUTPUT PROTECTION
DIODE
3,6,8,11 Y*
1,4,9,12 A
2,5,10,13 B
http://onsemi.com
14 1
MARKING DIAGRAMS
14 SOIC−14 D SUFFIX CASE 751A
1
HC03AG AWLYWW
14 1
TSSOP−14 DT SUFFIX CASE 948G
14
HC 03A ALYWG
G
1
A L, WL Y, YY...