MCM-NE2000

STD BUS, CMOS STD BUS FEATURES q q LPM-NE2000 MCM-NE2000 Ethernet LAN Card IEEE 802.3 Ethernet controller board 10 Mbps operation, CSMA/CD q Supports 10BASE2 thin coax, 10BASE5 via an AUI and 10BASE-T twisted pair interfaces q NE2000 compatible architecture q Software configurable settings for jumperless, autoconfigurable, “easy-to-use” network designs q EPROM socket for auto-boot applications q Five LEDs onboard for visual status information q Compatible with many Network Operating Systems drivers and utilities q Diagnostic loopback support for increased testability q Supports 20- or 24-bit memory addressing q Available for CMOS STD Bus: LPM-NE2000 q Single +5 volt power required The MCM/LPM-NE2000 module is a NE2000 compatible local area network adapter board designed for the STD Bus. As a result, most network operating systems, drivers and utilities for using Ethernet in a PC-compatible environment can be used without modification. It conforms to the IEEE 802.3 and Ethernet standards for a 10 Mbps Carrier Sense Multiple Access/Collision Detection (CSMA/CD) local area network. The module provides connectivity for 10BASE5 thick coax, 10BASE2 thin coax, and 10BASE-T twisted-pair on a single board. Also an EPROM socket is included to support user installed remote boot extensions. with the IEEE 802.3 standards. Supported interfaces include both the Thin and Thick Ethernet and Twistedpair Ethernet (10BASE-T) on a single STD Bus board. Attachment Unit Interface (AUI) - The LPM/...