MCP6S91/2/3
Single-Ended, Rail-to-Rail I/O, Low-Gain PGA
Features
• Multiplexed Inputs: 1 or 2 channels • 8 Gain Select...
MCP6S91/2/3
Single-Ended, Rail-to-Rail I/O, Low-Gain PGA
Features
Multiplexed Inputs: 1 or 2 channels 8 Gain Selections:
- +1, +2, +4, +5, +8, +10, +16 or +32 V/V Serial Peripheral Interface (SPI™) Rail-to-Rail Input and Output Low Gain Error: ±1% (max.) Offset Mismatch Between Channels: 0 µV High Bandwidth: 1 to 18 MHz (typ.) Low Noise: 10 nV/√Hz @ 10 kHz (typ.) Low Supply Current: 1.0 mA (typ.) Single Supply: 2.5V to 5.5V Extended Temperature Range: -40°C to +125°C
Typical Applications
A/D Converter Driver Multiplexed Analog Applications Data Acquisition Industrial Instrumentation Test Equipment Medical Instrumentation
Block Diagram
VDD
CH0 CH1
MUX
CS SI SO SCK
SPI™ Logic
RF Gain 8
Switches
RG
VOUT
Description
The Microchip Technology Inc. MCP6S91/2/3 are analog Programmable Gain
Amplifiers (PGAs). They can be configured for gains from +1 V/V to +32 V/V and the input multiplexer can select one of up to two channels through a SPI port. The serial interface can also put the PGA into shutdown to conserve power. These PGAs are optimized for high-speed, low offset
voltage and single-supply operation with rail-to-rail input and output capability. These specifications support singlesupply applications needing flexible performance or multiple inputs.
The one-channel MCP6S91 and the two-channel MCP6S92 are available in 8-pin PDIP, SOIC and MSOP packages. The two-channel MCP6S93 is available in a 10-pin MSOP package. All parts are fully ...