3-element colour sensor
www.DataSheet4U.com
DATA-SHEET
MCS3AT/BT
3-element colour sensor – TO5
FUNCTION
The colour sensors are made of 3 Si-PI...
Description
www.DataSheet4U.com
DATA-SHEET
MCS3AT/BT
3-element colour sensor – TO5
FUNCTION
The colour sensors are made of 3 Si-PIN photo diodes integrated on chip. They are carried out as segments of a ring with the diameter of 2,0 mm. The design as Si-PIN photo diodes allows signal frequencies up to MHz-range. In order to achieve a small cross talk between the photodiodes the individual sectors were separated from each other by additional structures. Each of these photodiodes is sensitised with dielectric spectral filter for its colour range, preferably for the primary colours red, green and blue.
APPLICATION
Quality control Monitoring the production Control of manufacturing Detection of colour marks
FEATURES
Dielectric filters guaranties the good optical properties of the colour sensors, such as: − high transmission − slight aging of the filter − high temperature stability − high signal frequency − reduced cross talk − small size (diameter of the optical sensitive surface ca. 2 mm)
CONSTRUCTION
3 on chip integrated PIN photo diodes different package versions dielectric filters for the three colour ranges: red, green and blue (TO5, with/without IR-blocked) Electrical connections − three anodes − one common cathode
Distributor: Laser Components Instrument Group, Wilmington MA, Phone: 978 658 9100, www.laser-components.com
The information disclosed herein was originated by and is the property of MAZeT. MAZeT reserves all patent, proprietary, design, use, sales, man...
Similar Datasheet