MD7101_A01
Preliminary 2.4GHz FSK Receiver
www.DataSheet4U.com
Rx module specification
MD7101_A01
PRELIMINARY
(Oct, ...
MD7101_A01
Preliminary 2.4GHz FSK Receiver
www.DataSheet4U.com
Rx module specification
MD7101_A01
PRELIMINARY
(Oct, 2003, Version 1.0)
AMIC Technology, Corp.
www.DataSheet4U.com MD7101_A01
General Description
The receiver module is designed for 2.4GHz ISM band wireless applications using AMIC A7101 FSK transceiver. This module features a fully programmable frequency synthesizer, which is base on 100KHz reference frequency and 300uA charge pump output current. The data rate is 57.6Kbps or 64Kbps.
Electrical specification
Item
Supply
voltage Current consumption Frequency Rx sensitivity Modulation Channel spacing Channel number Interface Dimension Operating temperature
Specification
3 - 5V 6uA(typical) @sleep mode (regulator off) 10mA(typical) @sleep mode (regulator on) 12mA(typical) @stand-by mode 40mA(typical) @Rx mode 2416 – 2478 MHz -80 dBm (max) FSK 2 MHz 32 6 & 3 pin 1.27mm header 35(L) x 19(W) x 10(H) mm3 0 – 50 ℃
Remark
BER≦1E-3
PRELIMINARY
(Oct, 2003, Version 0.0)
1
AMIC Technology, Corp.
www.DataSheet4U.com MD7101_A01
Interface
Pin Number
J1-3 J1-4 J1-5 J1-6 J1-7 J1-8 J2-1 J2-2 J2-3
Pin Name
VIN EN_REG SPI_LATCH SPI_CLOCK SPI_DATA GND MUTE EN_AFC RXDATA
Description
Supply
voltage.
Voltage regulator enable input, active high (VIN). Latch for SPI interface. Clock for SPI interface. Data for SPI interface. Ground. Receiver mute control output, active low (open drain). AFC circuit control input, active high. Receiver data output.
Note
Option.
Option. ...