DatasheetsPDF.com

MDC-163 Datasheet

Part Number MDC-163
Manufacturers Tyco Electronics
Logo Tyco Electronics
Description Termination-Insensitive Biasable Mixer
Datasheet MDC-163 DatasheetMDC-163 Datasheet (PDF)

www.DataSheet4U.com Termination-Insensitive Biasable Mixer, 1 - 6 GHz Features • LO Drive: 0 dBm • Intermodulation Ratio Insensitive to IF Ports Mismatches • Conversion Loss: 7 dB Typical Midband • Impedance: 50 Ohms Nominal • Maximum Input Power: 500 mW max. @ 25°C, Derated 6.4 mW/°C • Low Power: +24 dBm Max. • DC Bias: +5, -5 VDC @12 mA each • MIL-STD-883 Screening Available MDC-163 V3 C-2 Description The unique design of the termination insensitive mixer (TIM) enables it to apply high reve.

  MDC-163   MDC-163






Part Number MDC-169SMA
Manufacturers Tyco
Logo Tyco
Description Termination Insensitive Mixer / 1 MHz - 3.5 GHz
Datasheet MDC-163 DatasheetMDC-169SMA Datasheet (PDF)

www.DataSheet4U.com Termination Insensitive Mixer, 1 MHz - 3.5 GHz Features • Intermodulation Ratio is Insensitive to Port Mismatches • VSWR: <2.0:1 Typical Midband • Isolation: 35 dB Typical Midband • Impedance: 50 Ohms Nominal • Maximum Input Power: 350 mW Max @ 25°C, Derated to 85°C @ 3.2 mW/°C • LO Power: +24 dBm Max. • MIL-STD-883 Screening Available MD-/MDC-/MDS-169 V5 FP-2 (MD-169) Description The unique design of the termination insensitive mixer (TIM) enables it to apply high reverse.

  MDC-163   MDC-163







Part Number MDC-164
Manufacturers Tyco Electronics
Logo Tyco Electronics
Description Termination-Insensitive Mixer
Datasheet MDC-163 DatasheetMDC-164 Datasheet (PDF)

www.DataSheet4U.com Termination-Insensitive Mixer, 0.5 - 9 GHz Features • Intermodulation Ratio Insensitive to IF Ports Mismatches • Conversion Loss: 6.5 dB Typical Midband • Maximum Input Power: 350 mW max. @ 25°C, Derated 3.5 mW/°C • Low Power: +24 dBm Max. • MIL-STD-883 Screening Available MDC-164 V3 C-3 Description The unique design of the termination insensitive mixer (TIM) enables it to apply high reverse voltage to diodes during their “off” phase, in the LO cycle. This allows for highe.

  MDC-163   MDC-163







Part Number MDC-162
Manufacturers Tyco Electronics
Logo Tyco Electronics
Description Termination-Insensitive Mixer
Datasheet MDC-163 DatasheetMDC-162 Datasheet (PDF)

www.DataSheet4U.com Termination-Insensitive Mixer, 1 - 7 GHz Features • Intermodulation Ratio Insensitive to IF Ports Mismatches • Conversion Loss: 6 dB Typical Midband • Impedance: 50 Ohms Nominal • Maximum Input Power: 350 mW max. @ 25°C, Derated 3.5 mW/°C • Low Power: +24 dBm Max. • MIL-STD-883 Screening Available MDC-162 V3 C-2 Description The unique design of the termination insensitive mixer (TIM) enables it to apply high reverse voltage to diodes during their “off” phase, in the LO cyc.

  MDC-163   MDC-163







Termination-Insensitive Biasable Mixer

www.DataSheet4U.com Termination-Insensitive Biasable Mixer, 1 - 6 GHz Features • LO Drive: 0 dBm • Intermodulation Ratio Insensitive to IF Ports Mismatches • Conversion Loss: 7 dB Typical Midband • Impedance: 50 Ohms Nominal • Maximum Input Power: 500 mW max. @ 25°C, Derated 6.4 mW/°C • Low Power: +24 dBm Max. • DC Bias: +5, -5 VDC @12 mA each • MIL-STD-883 Screening Available MDC-163 V3 C-2 Description The unique design of the termination insensitive mixer (TIM) enables it to apply high reverse voltage to diodes during their “off” phase, in the LO cycle. This allows for higher power level performance with minimum distortion. In addition the TIM has internal loads that provide a good match and also absorb mixer generated LO frequency terms. Combined, these features give the mixer its insensitivity to external mismatches, plus superior VSWR. Applied bias allows this mixer to perform at low LO power levels. 1 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for addition.


2007-07-27 : V6310    TDA7379    A3P060    A3P030    A3P125    A3P250    A3P400    A3P600    A3P1000    KPE-123   


@ 2014 :: Datasheetspdf.com ::
Semiconductors datasheet search & download site (Privacy Policy & Contact)