Termination Insensitive Mixer, 1 MHz - 3.5 GHz
V 3.00
MD-/MDC-/MDS-169
Features
n Intermodulation Ratio is Insensitiv...
Termination Insensitive Mixer, 1 MHz - 3.5 GHz
V 3.00
MD-/MDC-/MDS-169
Features
n Intermodulation Ratio is Insensitive to Port Mismatches n VSWR: <2.0:1 Typical Midband n Isolation: 35 dB Typical Midband n Impedance: 50 Ohms Nominal n Maximum Input Power: 350 mW Max @ 25°C, Derated n n
FP-2 (MD-169)
to 85°C @ 3.2 mW/°C LO Power: +24 dBm Max. MIL-STD-883 Screening Available
Description
The unique design of the termination insensitive mixer (TIM) enables it to apply high reverse
voltage to diodes during their “off” phase, in the LO cycle. This allows for higher power level performance with minimum distortion. In addition the TIM has internal loads that provide a good match and also absorb mixer generated LO frequency terms. Combined, these features give the mixer its insensitivity to external mismatches, plus superior VSWR.
C-7 (MDC-169)
SF-1 (MDS-169)
Termination-Insensitive Mixer, 1 MHz - 3.5 GHz
MD-/MDC-/MDS-169
V 3.00
Electrical Specifications1(MD-/MDC-169): TA = -55°C to +85°C
Parameter Frequency Range Conversion Loss Test Conditions RF, LO Ports IF Port Frequency 0.001 - 3.5 5 - 1500 5 - 1000 MHz 2 5 - 3000 MHz 3 1 - 3500 MHz LO to RF LO to IF RF to IF 5 - 1000 MHz 1 - 3500 MHz 5 - 1000 MHz 1 - 3500 MHz 10 - 500 MHz 1 - 3000 MHz 1 - 3500 MHz — — — 10 MHz 500 MHz 3000 MHz — Units GHz MHz dB dB dB dB dB dB dB dB dB dB dBm dBm — dB dB dB dB Min — — — — — 30 20 30 20 30 20 18 — — — — — — — Typ — — — — — — — — — — — — +7 +5 — 55 58 56 3 Max — — 7 8 10 — — — — — — — ...